Table of Contents
This chapter explains the basic operating procedure, using as an example the PD78F4216 used as the target.
Specifically, this chapter discusses how to start the system and how to write a program to the target by executing the
E.P .V. command. For the other commands and their usage, see Chapter 5.
[Operating conditions in this example]
The operating conditions for the example used in this chapter are as follows:
HOST I/F
: PRINTER I/F
Target
:
PD78F4216 (with FA adapter)
Interface
: UART 9600 bps
Clock In Flashpro 16 MHz
Mode CHIP
V
5.0 V
DD
V
10.0 V
PP
Command : E.P .V.
(1) Starting the system
Connect the PG-FP3 and host.
Confirm that the interface select switch is set to the printer interface position.
Connect the PG-FP3 and target (FA adapter).
Confirm that the target V
CHAPTER 4 BASIC OPERATING PROCEDURE
switch is set to the OUT position.
DD
Photo 4-1. Connection of Host, PG-FP3, and Target
User's Manual U13502EJ2V0UM00
37
- Quick Links:
- Function Specifications
Hide quick links:
Table of Contents
