Page 2
& indhold / ACCeSSorieS / ΕΞΑΡΤΗΜΑΤΑ ΚΑΙ ΠΕΡΙΕΧΟΜΕΝΑ ΣΥΣΚΕΥΑΣΙΑΣ Følgende er indeholdt i pakken, JACOB JENSEN Telefon 50 (inklusive dansk telefonadapter): 1. Telefonrør . Base station 3. Bordholder 4. Skruer og plugs 5. Strømforsyning 6. Samlestik 7. Samleledning 8. Telefonledning 9.
Page 3
Baby monitor στην άλλη • Indendørs rækkevidde 50 meter • Ενδοεπικοινωνία • Udendørs rækkevidde 300 meter • Εμβέλεια σε εσωτερικό χώρο: 50 μέτρα • Lav stråling • Εμβέλεια σε εξωτερικό χώρο: 300 μέτρα • Χαμηλή ακτινοβολία MAin feAture liSt •...
This is done automatically so that the system will always adjust the strength of the RF-signal to the lowest possible. note: You may expand your Telephone 50 by adding more Telephone 10 cordless handsets with charger. Up to six handsets can be connected. These can be purchased separately from the retailer where you purchased this product.
Page 7
option: The telephone can be equipped with a SANIK .4V 650mAh Ni-MH battery, model SN-AAA65H-S-J1. which enables the telephone to operate for a short period in case of power failure. The battery is optional and not included. Caution • Risk of explosion if the battery is replaced by an incorrect type.
Page 8
A .3 . Setting language Important Notice If you would like to choose another language than the • To obtain the best battery performance, the back-up preset English, please do as follows: battery pack should be charged for 10 hours after first time installation.
4. Insert the silver slip to the slot area on the base station diSplAy SyMbolS And their indiCAtion and close the memory key plate. In standby / Idle mode: Symbol indication 14:05 It shows the current time in 4-hour format. 0/01 It shows the current date in date/month format.
buttonS And their funCtionS Before going through the following keypad functions, it is a good idea to understand that multiple functions may be assigned to a single button in order to reduce buttons cluster. On some buttons, short and long push on one button gives you different functions in different modes.
Page 11
button in standby mode in conversation mode in programming / viewing mode In standby mode, a short push on In conversation mode, this button In programming & memory review this button will show you the phone functions as ”volume down” for the mode, this button functions as book list.
prepArAtion before uSe as the date/time information will be received automatically from the caller ID signal. For use in countries with DTMF Attention caller ID system (or countries with FSK system where date/ Your DECT phone is protected by PINs (personal time is not sent from the telephone operator), go through identification numbers).
5. Press to display either ”On” or ”Off” and 4. Press to select ”Prefix Dial”.Press press to confirm. For ”Key”, select from The current setting is displayed. ”Pattern 1-3” or ”Off” and press 5. Enter the number using the number keypad or press 6.
Page 14
Using the speaker phone: e .6 . volume 1. Press . The display will show the speaker icon The speaker, handset and headset volume are set . Use the keypad to enter the number you wish to dial. independently using in the related 3.
Page 15
1. Press the numeric keys to enter the EXTERNAL LINE DIGIT. e .14 . to make an internal call between the base unit and a . Press to insert a pause. The display shows “P”. cordless handset 3. Press the numeric keys to enter the TELEPHONE NUMBER. You may make intercom from the base unit to a specific handset extension.
Conference call Key Map: You can hold a three-part conversation (conference call) baby Monitor select handset between the base unit, an external caller and another internal handset user. On the base unit: During an external call: 1. Press to access the main menu. 1.
Page 17
. Use the numeric buttons to enter the phone number f .4 . to delete the phone book Memory (timed pause is often inserted inside the telephone Key Map: number when the phone is connected to a PABX. phone book to select number Press and hold until the display shows P), push...
4. The desirable phone number is saved to the selected speed G .1 . to review Caller id records dial key. To review Caller ID records press and select the ”Call Log List”. Use to scroll among records, or f .8 . to dial out an entry of the memory keys press to exit and return to standby.
h .1 . Setting ringer volume & ringer type 3. Press to select ”Set Appointm.”. Press Ringer Volume Key Map: 4. Press to select one from ”Appointment 1” Audio Setting ringer volume to ”Appointment 5”. Press select the volume 5. Press to select ”On”.
Page 20
On the handset: i .4 . resetting your phone Enter the base PIN code. If you reset your phone, the base will return to the default Preset base PIN code is 0000. settings. The time, date, handset name, phone book, call log list and redial list will not return to default.
revertinG to fACtory defAult SettinG Try to connect another telephone to the telephone socket, if the problem persists and it appears that there is a problem with your telephone line system, consult your You may change all settings in your DECT phone back to the network provider.
Q4 . Caller’s number does not show on my phone! • Use only the power cord and battery(ies) indicated in Make sure your phone line is provided with caller ID this manual. Do not dispose of batteries in a fire. They function from the phone service provider.
Please ask you dealer about current means of disposal. eC deClArAtion of ConforMity Hereby Bell Xpress A/S declares that this equipment (Telephone 50, type JJ T50 DECT / RTX3073) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC R&TTE.