HP ProLiant BL10e Quickspecs page 8

QuickSpecs

Standard Features

SmartStart

SmartStart

SmartStart

SmartStart

Industry Standard

Industry Standard

Industry Standard

Industry Standard

Compliance

Compliance

Compliance

Compliance

Intelligent Manageability Insight Manager 7

Intelligent Manageability

Intelligent Manageability

Intelligent Manageability

Availability

Availability

Availability

Availability

Security

Security

Security

Security

SmartStart is a tool that simplifies single server setup, providing a rapid way to deploy reliable and consistent server

configurations. SmartStart 7.00 and later can now deploy the ProLiant BL20P G3 and ProLiant BL40P servers, using the I/O

port with an attached USB CD-ROM device. To obtain a copy of SmartStart for your blade server, redeem the coupon that is

included with your Blade server or order your copy from the SmartStart web site. For more information, please visit the

SmartStart Web site at http://www.hp.com/servers/smartstart.

SmartStart version supported (minimum): SmartStart 6.20

ACPI 1.0b compliant

SDG 3.0 compliant

Microsoft Logo certifications

MIB-II (RFC 1213), Bridge MIB (RFC 1493), Interface MIB (RFC 2233), 801.1Q MIB (RFC 2684), RMON1 MIB (RFC 1757)

groups 1, 2, 3, and 9, and Ethernet MIB (RFC1643) (ProLiant BL e-Class C-GbE Interconnect Switch interconnect tray

option)

IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1D, IEEE 802.1p, IEEE 802.3ac and 802.1Q, IEEE 802.1Q, and IEEE

802.3x (ProLiant BL e-Class C-GbE Interconnect Switch interconnect tray option)

SNMP v1 (RFC 1157) and RMON v1 (RFC 1757) groups 1, 2, 3, and 9 (ProLiant BL e-Class C-GbE Interconnect Switch

interconnect tray option)

HP Systems Insight Manager

ROM Based Setup Utility (RBSU)

Automatic Server Recovery (ASR-2)

Enclosure Self Recovery (ESR)

Advanced Configuration and Power Interface Specification Ready (ACPI)

Server Blade and Enclosure Health Logs

Redundant Power Supply Utility

Power Down Utility

Pre-Failure Warranty (covers processors, hard drives and memory)

HP Interconnect Switch Management System and Utilities (included with the ProLiant BL e-Class C-GbE Interconnect

Switch interconnect tray option)

Redundant Hot-Plug Power Supplies (ProLiant BL e-Class Server Blade Enclosure)

Redundant Hot-Plug Fans (ProLiant BL e-Class Server Blade Enclosure)

ECC Memory (ProLiant BL10e Server Blade)

Redundant ROM (ProLiant BL10e Server Blade)

Support for ProLiant network adapter teaming

Dual network communication paths to each server blade using redundant, non-blocking layer 2 switch modules

Redundant inter-module communication links

Two redundant uplink ports per each interconnect switch module

IEEE 801.1D Spanning tree protocol for loop-free path redundancy

Redundant configurable community strings and SNMP trap manager hosts

IEEE 802.3ad automatic multi-link load balancing and link failover (excluding LACP)

Power-on password

Administrator's password

Secure Shell (SSH) access through the Integrated Administrator serial console

ProLiant BL e-Class C-GbE Interconnect Switch interconnect tray option security

Multilevel user names and passwords with configurable time out period setting

Ability to disable web-based and Telnet access to the switch user interfaces

256 IEEE 802.1Q tagged VLANs per interconnect switch module

Unicast and multicast static MAC address packet filtering table (layer 2 access control list)

Ability to specify the IP based management stations that are allowed to access each switch

Restriction on the maximum number of MAC addresses learned on a per port basis

Secure shell (SSH) access to the switch command line and menu driven interfaces via the Integrated Administrator

DA - 11686

HP ProLiant BL10e Generation 2 (G2) Server Blade

HP ProLiant BL10e Generation 2 (G2) Server Blade

HP ProLiant BL10e Generation 2 (G2) Server Blade

HP ProLiant BL10e Generation 2 (G2) Server Blade

Worldwide — Version 13 — October 8, 2004

Page 8