HP MSL6000 Series User Manual page 123
Storageworks msl6000 series storage tape library
Hide thumbs
Also See for MSL6000 Series:
- Reference manual (48 pages) ,
- Quickspecs (18 pages) ,
- Setting up (6 pages)
Table of Contents
Table 10
Fault Symptom Codes (continued)
FSC
Message
3110
Picker Retries Exceeded
3111
Picker Retries Exceeded 1
(Picker retries exceeded during a
pass-through fetch operation.)
3112
Picker Retries Exceeded 2
3113
Picker Retries Exceeded 3
(Picker retries exceeded during a bin stow
operation.)
3115
Picker Retraction Error
(Picker did not retract during a bin check
operation.)
3200
Shuttle Jammed
(Shuttle could not reach target location.)
ERP
•
Cycle power to the library or reboot by
using the LCD touch display.
•
Run cartridge cycle test using the LCD
touch display. (Menu -> Maintenance ->
Diagnostic options)
Note: If the backup application is running,
update the application cartridge map.
Press the Enter button to reboot.
•
•
Cycle power to the library or reboot
using the GUI touch screen.
•
Check pass-through alignment.
•
Cycle power to the library or reboot by
using the LCD touch display.
•
Run cartridge cycle test using the LCD
touch display. (Menu -> Maintenance ->
Diagnostic options)
Note: If the backup application is running,
update the application cartridge map.
Press the Enter button to reboot.
•
Cycle power to the library or reboot
•
using the GUI touch screen.
•
Ensure that there are no obstructions
inside the library (all cartridges are in
magazines).
•
Ensure cartridges are fully inserted in the
magazine(s).
•
Press the Enter button to reboot.
•
Cycle power to the library or reboot
using the GUI touch screen.
•
Press the Enter button to reboot.
•
Check pass-through mechanism
alignment.
•
Cycle power to the library or reboot
using the GUI touch screen.
MSL6000 series tape library user guide 123
- Quick Links:
- Models
Hide quick links:
Table of Contents
Troubleshooting
