Page 1
HVB16TPTX HVB16TPTX-KT UTP Video Transmitter User Manual 900.0571 - November 2005 – Rev. 1.01...
Page 2
ISSUE DATE REVISIONS HVBMU001133 May 2005 Initial Release (PCN 1918) 900.0571 September 2005 Add HVB16TPTX-KT and HVB16TPTX-KTX (EC03485) Revise contents of HVB16TPTX and remove HVB16TPTX- 1.01 November 2005 Rev. 1.01 900.0571 16-Nov-05...
COMPLYING WITH ALL FEDERAL, STATE, AND LOCAL LAWS AND STATUTES CONCERNING THE MONITORING AND RECORDING OF VIDEO AND AUDIO SIGNALS. HONEYWELL VIDEO SYSTEMS SHALL NOT BE HELD RESPONSIBLE FOR THE USE OF THIS PRODUCT IN VIOLATION OF CURRENT LAWS AND STATUTES.
IMPORTANT SAFEGUARDS READ INSTRUCTIONS – All safety and operating instructions should be read before the unit is operated. RETAIN INSTRUCTIONS – The safety and operating instructions should be retained for future reference. HEED WARNINGS – All warnings on the unit and in the operating instructions should be adhered FOLLOW INSTRUCTIONS –...
Page 6
OBJECT AND LIQUID ENTRY – Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the unit. SERVICING –...
Page 7
EXPLANATION OF GRAPHICAL SYMBOLS The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Page 8
Notes: Rev. 1.01 viii 900.0571 16-Nov-05...
SECTION 1: INTRODUCTION PRODUCT DESCRIPTION The HVB16TPTX and HVB16TXTXX are active video transmitters that provide for connection of 16 cameras using conventional coaxial cable with BNC connectors and converts the video signal for connection to unshielded twisted pair cabling. The twisted pair connections are RJ45 plugs.
Output 13-16 Output 9-12 Output 5-8 Output 1-4 16-24 VAC/DC 0.4 Amps Figure 1. HVB16TPTX Rear Panel Table 1: Rear Panel Connections Connector Description Power (16-24VAC/DC, 0.4 Amps) Connect the power supply provided with the unit at the Power connector.
RJ45 PIN CONNECTIONS Figure 2. RJ45 Plug Connector (Shown with Tab Underneath) Table 2. RJ45 Pin-Outs Function Video In Channel 4 (+) Video In Channel 4 (-) Video In Channel 2 (+) Video In Channel 1 (-) Video In Channel 1 (+) Video In Channel 2 (-) Video In Channel 3 (+) Video In Channel 3 (-)
INPUT Switch Off : 0-500 M ( 0 -1500 Ft ) Power Power Switch On: 500-1000 M ( 1500 - 3000 Ft ) Figure 4. HVB16TPTX FRONT PANEL Table 2: Front Panel Controls Description Control Power LED lights when power is applied to unit.
OPERATION After equipment connections are made and power is applied to the HVB16TPTX, operation of the unit is automatic. The video signal received at the video input BNC connector is converted for output on the appropriate RJ45 Video Output connector. For example, the video connected at Input 1 is outputted at RJ45 Output 1.
Page 20
All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell Video Systems. The information in this publication is believed to be accurate in all respects. However, Honeywell Video Systems cannot assume responsibility for any consequences resulting from the use thereof. The information contained herein is subject to change without notice.