Fujitsu SPARC Enterprise T2000 Getting Started Manual

SPARC

Enterprise T2000 Server Getting Started Guide

®

This guide describes the minimum steps you must perform to power on and boot your server for the first time

using the preinstalled Solaris™ Operating System (Solaris OS).

SPARC Enterprise T2000 Server

FIGURE 1

For quick installation and configuration, follow these steps. For more detailed information, refer to the complete

online product documentation set at:

Understand the following information before you set up the server for the first time:

Do not apply power until instructed to do so – This system includes a system controller (SC) that is used to

■

configure and boot the host server. To properly configure the host server and view SC messages, do not apply

AC power to the server until the SC and host networking connections are made, as described in this guide.

Choose the best instructions for your situation – The quick setup instructions in this guide work for any

■

networking environment, and require the use of a terminal device for connection to a serial port. If you have

a networking environment running DHCP, you can configure your system using the Ethernet management

port. To take advantage of the DHCP setup method, refer to the online installation guide in the online product

documentation set at:

http://www.fujitsu.com/sparcenterprise/manual/

http://www.fujitsu.com/sparcenterprise/manual/

Shipping Contents

Quantity

Item

1

Server

1

Rackmounting kit with cable

management assembly

2

RJ-45 Ethernet cable

1

RJ-45 to DB-25 adapter (crossover)

1

RJ-45 to DB-9 adapter (crossover)

1

Wrist strap

2

Power cords (packaged separately)