Related Manuals for JVC LT-32SH6
Summary of Contents for JVC LT-32SH6
- Page 1 LT-32SH6 LT-37SH6 WIDE LCD PANEL TV I NSTRUCTIONS Digital ideo roadcasting Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996) Number: 4013 for LT-32SH6; 4014 for LT-37SH6 © 2006 VictorCompanyof Japan, Limited E030057212...
- Page 3 Thank you for buying this JVC WIDE LCD PANEL TV To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. (“LCD” stands for Liquid Crystal Display.) READ THESE INSTRUCTIONS. KEEP THESE INSTRUCTIONS.
-
Page 4: Cleaning The Screen
Point defects LCDs use collections of fine pixels to display images. While there is no problem with more than 99.99% of these pixels, please understand that a very small number of pixels may not light or may light all the time. Distance recommendations Avoid improper installation and never position the unit where good ventilation is impossible. -
Page 5: Table Of Contents
Displaying the source information ...... 10 Connecting external equipment......33 ZOOM function ........... 11 Using the PCPIP function ........12 Troubleshooting........34 Operating a JVC brand VCR or DVD player ..12 Specifications.......... 36 Teletext function........13 Basic operation........... 13 Hold ..............13 Sub-page ............ -
Page 6: Setting Up Your Tv
This stand can be used to adjust the directions of the TV tidy is attached to the back of the stand. screen. (depending on each model) Tilt the TV up and down: (only LT-32SH6) LT-32SH6 While holding the bottom of the stand with one hand, use your other hand to hold the middle of the top of the TV and slowly tilt the TV up and down. -
Page 7: Putting The Batteries Into The Remote Control
TV and then insert the hooks. • Leave the covers off if they do not fit properly. Do not force to replace the covers. Doing so may cause damages of the connection cables and the covers. LT-32SH6 LT-37SH6... -
Page 8: Connecting The Aerial And Video Cassette Recorder (Vcr)
Setting up your TV Connecting the aerial and VCR • The connecting cables are not provided. Use a good quality of 75-ohm coaxial cable to connect. ○ • Use a fiber connector to connect to digital sound equipment (DTV only) Caution •... -
Page 9: Initial Settings
Initial settings When the TV is first turned on, it enters the initial setting 3 AUTO PROGRAM menu appears mode. Follow the instructions on the on-screen display to make the initial settings. INSTALL ►AUTO PROGRAM ► button VCR/TV/ ▼▲:SELECT ◄►:MOVE DVD Switch 4 Press the OK button to enter the AUTO PROGRAM. -
Page 10: Tv Buttons And Functions
TV buttons and functions Turn the TV on from standby mode Press the button or buttons to turn the TV on from standby mode Choose a TV channel Press the buttons to choose a program number Watch images from external devices Press the TV/AV button to choose a TV/AV Terminal Adjust the volume... -
Page 11: Remote Control Buttons And Functions
Remote control buttons and functions Muting button Number buttons Information button Colour button TV/DTV button ◄/► / ▼/▲/button (Text)button button VCR/DVD/Teletext buttons (Favourite) button buttons 12 ZOOM button button 14 Standby button 15 VCR/TV/DVD switch 16 AV button 17 MENU button 18 OK button 19 BACK button Volume buttons... -
Page 12: Adjust The Volume
Remote control buttons and functions Adjust the volume Displaying the source information Press the buttons to adjust the volume. You can display the source information and current time on the The volume indicator appears and the volume changes as screen. buttons. -
Page 13: Zoom Function
Remote control buttons and functions Choose the ZOOM mode ZOOM function You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following 1 Press the ZOOM button to choose the ZOOM ZOOM modes. menu REGULAR: Adjusting the visible area of the picture... -
Page 14: Using The Pcpip Function
• If the main-picture signal is poor, the quality of the • Even if your device is made by JVC, some of these sub-picture may also be poor. buttons may not work, depending on the device you •... -
Page 15: Teletext Function
Teletext function Basic operation Hold You can hold a teletext page on the screen for as long as 1 Choose a TV channel with a teletext broadcast you want, even while several other teletext pages are being received. 2 Make sure to set the VCR/TV/DVD switch to the Press the (Hold) button Hold indication TV position. -
Page 16: Sub-Page
Teletext function Cancel Sub-page You can search for a teletext page while watching TV. Some teletext pages include sub-pages that are automatically displayed. 1 Press the number button to enter a page number, or press a colour button 1 Choose a teletext page that includes The TV searches for a teletext page. -
Page 17: Using The Tv's Menu
Using the TV’s menu This TV has a number of functions you can operate using 3 Press the ▼/▲ buttons to choose a function menus. To use all your TV’s functions, you need to understand • For details of the functions in the menus, see the the basic menu operating techniques fully. -
Page 18: Picture Setting
PICTURE SETTING Refer to “Using the TV’s menu” (see page 15) for details of WHITE BALANCE displaying the menu. You can select one of two WHITE BALANCE modes (two tones of white) to adjust the white balance of the PICTURE picture. -
Page 19: Sound
SOUND Refer to “Using the TV’s menu” (see page 15) for details HYPER SOUND of displaying the menu. You can enjoy Surround sound with a “live” effect by using SOUND the HYPER SOUND function. ► STEREO/I . II ◄ ▄▄▄▄▄ ON：... -
Page 20: Features
FEATURES Refer to “Using the TV’s menu” (see page 15) for details of displaying the menu. FEATURES ►SLEEP TIMER BLUE BACK CHILD LOCK ▼▲:SELECT ◄►:MOVE SLEEP TIMER You can set the TV to automatically turn off after a set period of timer; press the button to set the period of time from 30, 90, 60, 120, to OFF. -
Page 21: Install
INSTALL Refer to “Using the TV’s menu” (see page 15) for details of After the TV channels have been registered in the displaying the menu. program numbers, the PR LIST menu appears. • If you want, you can now edit the program numbers INSTALL using the AUTO PROGRAM function. -
Page 22: To Edit The Pr List Menu
PR LIST NAME: 01 ----- 11 ----- 21 ----- This function registers a channel name (ID) to a TV 02 JVC 12 ----- 22 ----- channel. 23 ----- 03 ----- 13 -----... - Page 23 02 ----- 12 ----- 22 ----- 03 ----- 13 ----- 23 ----- PR LIST 04 JVC 14 ----- 24 ----- 05 ----- 15 ----- 25 ----- 01 ----- 11 ----- 21 -----...
- Page 24 TV channel stored in the program number appears on the screen. PR LIST 01 ----- 11 ----- 21 ----- 02 JVC 12 ----- 22 ----- 03 ----- 13 ----- 23 ----- 24 -----...
-
Page 25: Operation While Watching Dtv
Operation while watching DTV Information function Using the Electronic Program Guide (EPG) hen the (Information) button is pressed while the EPG screen appears when the GUIDE button is pressed under information would be displayed. Digital terrestrial broadcasting (DVB-T). ① ② ③... -
Page 26: Operation With The Dtv Menu
Operation with the DTV menu This DTV has a number of functions you can operate by 5 Press the OK button to complete the setting entering menus. To use all functions, you need to understand The menu disappears. the basic menu operating techniques fully. •... - Page 27 Operation while watching DTV AUTOMATIC SEARCH 2 The default city will be displayed. Press the ▼/▲ buttons to choose the city you live in, It automatically stores the all DTV channels for which generally you have the best reception. This is automatic then press OK button.
-
Page 28: Edit Pr List
Operation with the DTV menu 3 Press the buttons to highlight Start Scan, EDIT PR LIST and then press OK button to implement scanning the channel. This feature allows you to edit channel settings that requires a password. 1 Press the buttons to choose EDIT PR LIST and press the OK button When you select EDIT PR LIST, it requires the... -
Page 29: Configuration
Operation with the DTV menu PCM (Pulse code modulation): CONFIGURATION A technique used to transform an incoming analog signal into a noise-free, digital equivalent. Set the basic setting for watching Digital terrestrial broadcasting (DVB-T). You can setup the audio output, Dolby Digital: local Time, a new pin code and I-Plate. - Page 30 Operation with the DTV menu TIME ZONE RECEIVER UPGRADE You may set your local time depending on area. Set the method to upgrade the Digital terrestrial broadcasting (DVB-T) receiver software. This function is only available to be upgraded by your distributor. 1 Press the ▼/▲...
- Page 31 Operation with the DTV menu ENTER PIN CODE I-PLATE SETUP You can change the pin code, and its purpose is allowing to The programer information setting can be adjusted. enter the system of locking certain channels in EDIT PR LIST menu.
-
Page 32: Pc Menu
PC MENU (In PC mode only) This TV also has a number of functions on PC mode; you PICTURE can operate using pc menus. You can change the picture settings of each PICTURE MODE PC MENU mode as you like. ►PC PICTURE POSTITION ►... -
Page 33: Sound
PC MENU (In PC mode only) WHITE BALANCE: SOUND You can adjust the picture colour mode. You can adjust the sound to your liking. HIGH: A bluish white. Using this mode when watching bright SOUND pictures allows you to enjoy a more vivid and bright picture. -
Page 34: Pc Support Mode List
PC MENU (In PC mode only) The resolution and the frequencies which are displayed on the PC Support mode list screen may not exactly same as this list. Mode Name H.Freq.(KHZ) Mode No. Please use AUTO Setup to automatically configure your Resolution V.Freq.(HZ) display to the best setting. -
Page 35: Additional Preparation
Additional preparation Connecting external equipment Connect the equipment to the TV, making the correct rear VCR (composite signal) ○ panel and front panel connections. VCR (composite signal/S-VIDEO signal) ○ DVD player (composite signal/S-VIDEO signal) ○ Before connecting anything: DVD player (component signal) ○... -
Page 36: Troubleshooting
Trobleshooting Troubleshooting If a problem arises while you are using the TV, please read this troubleshooting guide carefully before you ask to have the TV repaired. You may be able to fix it easily by yourself. For example, if the mains plug is disconnected from the mains outlet, or the TV aerial has problems, you may think there is a problem with the TV itself. - Page 37 Troubleshooting Troubleshooting rouesoong Other concerns • When the SLEEP TIMER function operates, the TV is automatically turned off. If the TV suddenly turns off, try to press the (standby) button to turn on the TV once again. If the TV goes back to normal, there is no problem. •...
-
Page 38: Specifications
Specifications Model LT-32SH6 LT-37SH6 COUNTRY setting AUSTRALIAN Broadcasting system CCIR B/G Colour system • Analogue 48.25~863.25MHz Channels and frequencies • Digital 174MHz~858MHz Sound-multiplex systems A2/NICAM system, Digital (MPEG2) Standard System) FLOF(Fastext),WST(World Teletext Power requirements 240V AC, 50Hz Power consumption 168 W, (standby < 1W) 217 W, (standby <...