Table of Contents
TV SCAN FUNCTION
Mode 12
Follow the steps on page 20 to enter the Function menu and
then select the TV Scan option as shown on the right.
Press the
cursor buttons to set the TV Scan option to
mode 12, then quit the menu.
In normal TV mode, press the TV SCAN button to enter
mode 12(12-picture) as shown below.
The 12 pictures will rotate to refresh individual program
after a few seconds starting from the program No.0 except
for those skipped program. If the preset channels are less
than 12, it will display the actual number of searched
program. If the preset channels are more than 12, use the
Page up/down buttons to select the next group of
program.
In this mode, you can press the
to select one of the pictures, and the program No. of the
selected picture will turn from white to green. Then, press
the ENTER button to quit, and the selected picture will fill
the entire TV screen.
In this mode, directly entering the program No. by using
the number buttons will quit this mode, then the selected
picture will fill the entire TV screen.
In this mode, no signal output from the speakers, the
headphone jack and the monitor out terminals.
In this mode, press the TV SCAN or the RETURN button to quit. If you enter the menu by pressing the
MENU button, it will quit this mode.
In this mode, the A/B, SWAP and POSITION buttons are invalid.
The Strobe function is shown as below.
Follow the steps on page20 to enter the Function menu, and select the Freeze option. Press the
buttons to set the Freeze option to Strobe, then quit the menu.
In normal TV mode, press the FREEZE button to enter the mode 12 automatically. The 12
the current moving picture. 11 continuous frozen pictures will display respectively in the other 11 pictures when
the FREEZE button is pressed. This function is not valid for all of input signal formats. When
Available appears, it is invalid.
In this mode, you can quit by pressing the RETURN or the FREEZE button.
In this mode, you can enter the Audio menu to perform the adjustment, when you enter other menus such as the
Picture menu, it will quit this mode.
At this point, the monitor out terminals on the TV will output the video and audio signals from the current
moving picture.
In this mode, the A/B, SWAP and POSITION buttons are invalid.
cursor buttons
34
cursor
th
picture will display
Not
Table of Contents
