Table of Contents
QuickSpecs
Overview
The HP FlexFabric 10Gb 2-port 534FLR adapter features the next generation of 10Gb Ethernet offering in a single chip solution on a
FlexibleLOM form factor, further reducing power requirements for 2 ports of 10Gb Ethernet. It is designed for use with HP ProLiant
Gen8 servers.
For more effective utilization of the 10GbE bandwidth, the HP 534FLR-SFP+ CNA offers Switch Independent Partitioning which enables
segmentation of each 10GbE port into four virtual ports, with flexible allocation of bandwidth to each port. Allowing IT organizations
to improve resource utilization while lowering infrastructure and operational costs.
The HP 534FLB supports enterprise class features such as VLAN tagging, adaptive interrupt coalescing, MSI-X, NIC teaming (bonding),
Receive Side Scaling (RSS), jumbo frames and PXE boot. It also supports virtualization features such as SR-IOV (Windows), VMware
NetQueue and Microsoft VMQ.
Models
HP FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter
HP FlexFabric 10Gb 2-port 534FLR-SFP+ FIO Adapter
Kit Contents
HP Ethernet 10Gb 2-port 534SFP+ Adapter
Quick install card
Product warranty statement
DA - 14618 North America — Version 1 — September 10, 2013
HP FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter
700751-B21
700752-B21
Page 1
Table of Contents
Related Manuals for HP FlexFabric 10Gb 2-port 534FLR
Summary of Contents for HP FlexFabric 10Gb 2-port 534FLR
- Page 1 Overview The HP FlexFabric 10Gb 2-port 534FLR adapter features the next generation of 10Gb Ethernet offering in a single chip solution on a FlexibleLOM form factor, further reducing power requirements for 2 ports of 10Gb Ethernet. It is designed for use with HP ProLiant Gen8 servers.
- Page 2 QuickSpecs HP FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter Compatibility Servers ProLiant DL (rack-optimized): HP ProLiant DL160 Gen8 HP ProLiant DL360p Gen8 HP ProLiant DL380p Gen8 HP ProLiant DL385p Gen8 HP ProLiant DL560 Gen8 ProLiant SL (scalable line): HP ProLiant SL210t Gen8...
-
Page 3: Standard Features
Support for SR-IOV (Windows) Dual-port 10 Gigabit The HP 534SFP+ adapter delivers 20 Gbps full duplex Ethernet transfer rate per port (40 Gbps per adapter), providing the network performance needed to improve response times and alleviate bottlenecks that Ethernet Throughput impact performance of next generation data centers. -
Page 4: Network Management
The HP 534SFP+ Adapter by Broadcom supports Precision Time Protocol-ready (PTP). Network Adapter Teaming The HP 534SFP+ adapter support for NIC teaming helps IT administrators increase network fault tolerance and increased network bandwidth, The team of adapters can work together as a single virtual adapter. The HP 534SFP+ provides support for several different types of teaming enabling IT administrators to optimize availability, improve performance and help reduce costs. -
Page 5: Configuration Utilities
Standard Features Server Integration The HP 534SFP+ adapter is a validated, tested, and qualified solution that is optimized for HP ProLiant servers. HP validates a wide variety of major operating systems drivers with the full suite of web-based enterprise management utilities including HP Intelligent Provisioning and HP Systems Insight Manager that simplify network management. -
Page 6: Service And Support
Protect your business beyond warranty with HP Care Pack Services When you buy HP Options, it's also a good time to think about what level of service you may need. HP Care Pack services provide total care and support expertise with committed response choices designed to meet your IT and business need. - Page 7 Offers customers a single point of contact for server problem diagnosis, hardware problem resolution to return the hardware in operating condition within 6 hours of the initial service request to the HP Global Solution Center, and basic software problem diagnosis, fault isolation, and resolution if available to HP. In case, the issue is with HP or supported third-party software product and cannot be resolved by applying known fixes, HP will contact the third-party vendor and create a problem incident on your behalf.
- Page 8 The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced by HP due to malfunction. It does not apply to any exchange of Disk or SSD/Flash Drives that have not failed. SSD/Flash Drives that are specified by HP as consumable parts and/or that have exceeded maximum supported lifetime and/or the maximum usage limit as set forth in the manufacturer's operating manual or the technical data sheet are not eligible for the defective media retention service feature option.
- Page 9 JG081C HP X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable JC784C HP X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable JG329A HP X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cable JG330A...
- Page 10 10 Gigabit Server NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each Adapters adapter. HP NC522SFP Dual Port 10GbE Gigabit Server Adapter 468332-B21 HP NC523SFP 10Gb 2-port Server Adapter 593717-B21 HP NC524SFP Dual Port 10GbE Module...
-
Page 11: Technical Specifications
QuickSpecs HP FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter Technical Specifications General Specifications Network Processor Broadcom BCM57810S chipset Data Rate Two ports, each at 20 Gbps full duplex; 40 Gbps aggregate full duplex theoretical bandwidth. Onboard Memory 256MB Bus Type PCI-e 2.0 x8... - Page 12 Windows is a US registered trademark of Microsoft Corporation. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.