Troubleshooting; Service Information - Black & Decker LI2000 Instruction Manual
Lithium pivotdriver
Hide thumbs
Also See for LI2000:
- Instruction manual (11 pages) ,
- Instruction manual (23 pages) ,
- User manual
Table of Contents
Available languages
Available languages
Seal"). Call your local retailer for details.
If you bring the batteries to a Black &
Decker Company-Owned or Authorized
Service Center, the Center will arrange
to recycle old batteries. Or, contact your
local municipality for proper disposal
instructions in your city/town.
To remove the battery pack for disposal:
1.) First, before attempting to disassemble
the product, turn it on and run it in either
Problem
• Battery will not charge.
For assistance with your product, visit our website www.blackanddecker.com for the
location of the service center nearest you or call the BLACk & DECkER help line at
1-800-544-6986.
Recommended accessories for use with
your tool are available from your local
dealer or authorized service center. If you
need assistance regarding accessories,
The RBRC™ (Rechargeable
Battery Recycling Corporation) Seal
on the lithium-ion battery (or battery
pack) indicates that the costs to
recycle the battery (or battery pack) at the
end of its useful life have already been
paid by Black & Decker. In some areas, it
is illegal to place spent lithium-ion batteries
in the trash or municipal solid waste
stream and the RBRC program provides
an environmentally conscious alternative.
All Black & Decker Service Centers are
staffed with trained personnel to provide
customers with efficient and reliable power
tool service. Whether you need technical
advice, repair, or genuine factory replacement
Black & Decker (U.S.) Inc. warrants this
product for two years against any defects
in material or workmanship. The defective
product will be replaced or repaired at no
charge in either of two ways.
TROUBLeShOOTINg
Possible Cause
• Charger not plugged into
a working outlet.
• Charger jack not fully plugged
into tool charging socket.
ACCeSSORIeS
The RBRC™ SeAL
SeRvICe INfORMATION
fULL TWO-yeAR hOMe USe WARRANTy
direction until it stops to ensure a complete
discharge of the batteries.
2.) Remove the screws in the product housing
and lift the housing half from the tool.
3.) Disconnect the terminal clips from the
batteries and lift the batteries out.
4.) Place the battery in suitable packaging to
prevent a short circuit of the battery terminals.
5.) Dispose of batteries as per
recommended guidelines.
please call: 1-800-544-6986.
WARNINg:
not recommended for use with this tool
could be hazardous.
RBRC in cooperation with Black & Decker
and other battery users, has established
programs in the United States and Canada
to facilitate the collection of spent lithium-ion
batteries. Help protect our environment and
conserve natural resources by returning the
tool to an authorized Black & Decker service
center for recycling. You may also contact
your local recycling center for information on
where to drop off the spent battery, or call
1-800-8-BATTeRy.
parts, contact the Black & Decker location
nearest you. To find your local service
location, refer to the yellow page directory
under "Tools—Electric" or call: 1-800-544-
6986 or visit www.blackanddecker.com
The first, which will result in exchanges
only, is to return the product to the retailer
from whom it was purchased (provided that
the store is a participating retailer). Returns
should be made within the time period of
8
Possible Solution
• Plug charger into a
working outlet. Refer to
"Important Charging
Notes" for more details.
• Check current at
receptacle by plugging in
a lamp or other appliance.
• Check to see if
receptacle is connected to
a light switch which turns
power off when you turn
out the lights.
• Check to be sure
charger plug is fully
inserted into tool
charging socket.
The use of any accessory
Hide quick links:
Table of Contents
