使用說明書 Operating Instructions 數位攝錄影機 Digital Video Camera NV-GS320 Model No. 使用前,請完整閱讀本說明書。 Before use, please read these instructions completely. VQT1A48...
Page 9
給電池充電 ª 適配器連接到插座,主要電路就總是 “帶電” 購買本產品時,電池是未充電的。 在使用本產品 的。 前,請給電池充電。 ≥電池充電時間 ( -10- ≥我們建議使用 Panasonic 電池。( ≥如果使用其他品牌的電池,我們不能保證本產品 的質量。 ≥如果 DC 輸入線被連接到 AC 適配器上 , 則電池不 會被充電。 請從 AC 適配器上取下 DC 輸入線。 將 AC 電源線連接到 AC 適配器和 AC 電源插孔 上。 對準標記將電源放入電源座,然後插牢插頭。 將 AC 電源線連接到 AC 適配器和 AC 電源插座...
使用之前 充電時間和可拍攝時間 安裝電池 ª 將電池推靠到電池座中,並滑動直到發出喀達一 在下面表中所示的時間是在溫度是 25 oC,濕度是 聲。 60% 時的時間。 如果溫度高於或低於 25 oC,充 電時間將會變長。 提供的電池/ 1 h 40 min CGR-DU06 1 h 15 min (7.2 V/ (1 h 10 min) 640 mAh) 30 min (30 min) CGA-DU12 2 h 25 min (7.2 V/ 2 h 15 min 1150 mAh)
與計算機一起使用 安裝/連接 根據您個人計算機的不同,可能會出現下列頁面 之一。 安裝 USB 驅動程式 ª 1 您的個人計算機不支持 USB 端子 (Hi-Speed 當操作系統是 Windows XP SP1 或 Windows USB(USB 2.0)),因此不能用 USB 電纜向個人 2000 SP4 時,請安裝此程式。 計算機上輸入攝錄放影機錄影帶上的視訊。 ( 當操作系統是 Windows XP SP2 時,不需要安裝 USB 驅動程式。) 當用提供的 USB 電纜將攝錄放影機連接到 PC 上 Cancel 並使用...
Page 53
與計算機一起使用 右鍵單擊 [Device Manager] 中的 [Enhanced ( 如果操作系統是 Windows XP) Host Controller] 等,然後選擇 [Properties]。 檢查 [Don’t search. I will choose the driver to install],然後單擊 [Next]。 ( 如果操作系統是 Windows 2000) 檢查 [Display a list of the known drivers for this device so that I can choose a specific driver],然後單擊...
Page 54
關於 SweetMovieLife/MotionDV STUDIO 的 PDF 使用說明 有關如何使用軟體應用程式的詳情,請閱讀幫助 檔案。 設定[start] >> [All Programs (Programs)] >> [Panasonic] >> [SweetMovieLife 1.0E] 或 [MotionDV STUDIO 5.6E LE for DV] >> [Manual(PDF format)]。 1) USB 連接電纜 2) USB 端口 選擇 [start] >> [All Programs (Programs)] >>...
Page 55
[ 網路攝影 ]。 用 USB 輔助連接電纜把攝錄放影機與個人電腦 連接到一起。 1) DV 電纜 2) DV 端口 選擇 [start] >> [All Programs (Programs)] >> [Panasonic] >> [SweetMovieLife 1.0E]/ [MotionDV STUDIO 5.6E LE for DV] >> [SweetMovieLife]/[MotionDV STUDIO LE for DV]。 ≥可以把用個人電腦編輯的視頻錄製到攝錄放影機 的錄影帶上。 1) USB 連接電纜...
Page 56
與計算機一起使用 其他 啟動 Windows Messenger/MSN Messenger/ Windows Live Messenger。 ≥單擊 [start] >> [Programs] >> 將檔案複製到個人電腦上 ª [Windows Messenger]/[MSN Messenger]/ -記憶卡讀取功能 ( 大容量記憶體 ) [Windows Live Messenger]。 如果用 USB 電纜將攝錄放影機連接到個人電腦 上,則可以將裝有記憶卡的攝錄放影機當作個人 ≥要想使用 Windows Messenger/MSN Messenger/ 電腦的一個外置驅動器使用,可以將記憶卡上錄 Windows Live Messenger 將錄製在錄影帶上的圖 製的檔案用 [Explorer] 等複製到個人電腦上。 片發送至其他個人計算機中,請在將攝錄放影機...
Page 75
規格 AC 適配器 VSK0651 安全注意事項 電源: AC 110 V 至 240 V,50/60 Hz 電流功率: 19 W DC 輸出: DC 7.9 V,1.4 A (攝錄放影機工作時) DC 8.4 V,0.65 A (電池充電時) 尺寸: 61 mm (寬) 32 mm (高) 91 mm (深) 重量: 約 110 g 規格更改恕不通知。...
ENGLISH ª Carefully read the Operating Information for your safety Instructions and use the Movie Camera correctly. ≥Injury or material damage resulting from any WARNING: kind of use that is not in accordance with the TO REDUCE THE RISK OF FIRE, ELECTRIC operating procedures explained in these SHOCK OR PRODUCT DAMAGE, ≥...
Page 78
Pages for reference -If you see this symbol- Pages for reference are indicated by dashes either side of a number, for example: -00- Information on Disposal in other Countries outside the European Union The menu operation flow is indicated by >> in the This symbol is only description.
Page 79
Before opening the CD-ROM package, please read the following. End User License Agreement (for USB Driver, SweetMovieLife and MotionDV STUDIO) You (“Licensee”) are granted a license for the Software defined in this End User Soft Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement. If Licensee does not agree to the terms and conditions of this Agreement, promptly return the Software to Matsushita Electric Industrial Co., Ltd.
Page 80
Contents Information for your safety ......... 77 Playback mode Playing back tape..........113 Before using Slow-motion playback/ frame-by-frame playback....... 114 Accessories............81 Variable-speed search function......114 Optional.............. 81 Playback on TV ..........115 Parts identification and handling ......81 Playing back card..........116 Fitting the lens cap..........
Before using Before using Parts identification and handling Accessories ª Camera The followings are the accessories supplied with this product. White balance sensor -111- Remote control sensor -97- Grip belt -83- Lens (LEICA DICOMAR) Microphone (built-in, stereo) -104- -107- (5)(6) 1) AC adaptor, DC input lead, AC mains lead -84- A Hong Kong Special Administrative Region...
Page 82
Before using (14) (15) (16) (20) (22) (17) (21) (18) (10) (19) (11) (12) (23) (24) (25) (13) (20) LCD monitor -87- -148- Viewfinder -88- -148- Due to limitations in LCD production Due to limitations in LCD production technology, there may be some tiny bright or technology, there may be some tiny bright or dark spots on the LCD monitor screen.
Before using Fitting the lens cap Fit the lens cap to protect the surface of the lens. ≥The lens cap and the lens cap cord come pre-attached to the grip belt. ≥When not using the lens cap, pull the lens cap cord in the direction of the arrow.
≥Battery charging time ( -85- ≥We recommend using Panasonic batteries. -81- ≥If you use other batteries, we cannot guarantee the quality of this product. ≥If the DC input lead is connected to the AC adaptor, then the battery will not get charged.
Before using ª Charging time and recordable time Fitting the battery Push the battery against the battery holder and The times shown in the tables below are for when slide it until it clicks. the temperature is 25 oC and the humidity is 60%. If the temperature is higher or lower than 25 oC, the charging time will become longer.
Before using ≥The actual time may become shorter than this. ª How to turn the power on and off with The recordable time shown in the table are the LCD monitor/viewfinder approximations. The recordable time will When the power switch is set to [ON], the power become shorter in the following cases: can be turned on and off with the LCD monitor ≥When you use both the viewfinder and the...
Before using Setting date and time ª Recharging the built-in lithium battery ≥If [0] or [--] is appears when the camera is When the movie camera is turned on for the first turned on, then the built-in lithium battery has time, [SET DATE AND TIME] will appear.
Before using Using the viewfinder Quick Start When quick start is ON the battery power is still ª Extending the viewfinder being consumed, even when the LCD monitor Pull out the viewfinder and extend it by and the viewfinder are closed. pinching the extension knob.
Before using ª Inserting/removing a cassette To cancel Quick Start Set [SETUP] >> [QUICK START] >> [OFF]. Fit the AC adaptor or the battery and turn on -94- the power. ≥If the [OFF/ON] switch is set to [OFF] while the Slide the [OPEN/EJECT] lever and open the unit is in quick start standby, the power turns off.
Before using ≥When inserting a previously recorded cassette, Inserting/removing a card use the blank search function to find the position Before inserting/removing a card, set the where you want to continue recording. If you are [OFF/ON] switch to [OFF]. overwriting a previously recorded cassette, be ≥If the card is inserted or removed with the power sure to find the position where you want to turned on, this camera may malfunction or the...
Before using ª Selecting a mode Card access lamp Rotate the mode dial to select the desired mode. Rotate the mode dial. ≥Set your desired mode to 1. ≥When the camera accesses the card (reading, recording, playback, erasing, etc.), the access : TAPE RECORDING MODE lamp lights up.
Before using How to use the joystick 2) Tape recording mode ([AUTO/MANUAL/FOCUS] switch is set to ª Basic joystick operations [MANUAL]) Operations on the menu screen and selection of files to be played back on the multi-image display Move the joystick up, down, left, or right to select an item or file, and then push in the centre to set 1 Select by moving up.
Before using Help mode 4) Card recording mode ([AUTO/MANUAL/FOCUS] switch is set to Select an icon for an explanation of the function. [AUTO]) ≥Set to Tape/Card Recording Mode. Press the joystick to display the icon during the recording pause. Move the joystick down until icon 1 appears.
Before using Switching the language Move the joystick right or press it to set the selection. You can switch the language on the screen display or the menu screen. Set [LANGUAGE] >> select the desired language. Move the joystick up or down in order to select the item to be set.
Before using ª Adjusting LCD monitor/viewfinder Operating with remote control The menu screen transition is the same as when ª Adjusting the brightness and colour the buttons on the main unit are used. Press the [MENU] button. level Set [SETUP] >> [LCD SET] or [EVF SET] >> [YES].
Before using Using the remote control (10) (14) ª Remote control Using the remote control supplied will enable controlling almost all the functions of this camera (15) to be controlled. (16) (11) (12) (13) (17) Photoshot button [PHOTO SHOT] ¢ (10) (11) Rewind/review button [6]...
Page 97
Before using ª ª Install a button-type battery Remote control usable range Install the button-type battery supplied in the remote control before using it. While pressing the stopper 1, pull out the battery holder. Set the button-type battery with its (i) mark ≥The distance between the remote control and facing upward and get the battery holder the camera: Within approx.
Page 98
Before using ª Concerning the button-type battery ≥When the button-type battery runs down, replace it with a new battery (part number: CR2025). The battery is normally expected to last about 1 year, but it depends on operation frequency. ≥Keep the button-type battery out of the reach of children.
≥In order to fully exhibit the performances of the ª Check points LP mode, we recommend using Panasonic ≥Remove the lens cap. ( -83- cassettes marked LP mode. (When the camera is turned on with the lens cap ≥It is not possible to dub audio onto image...
Record mode Recording on a tape ª On-screen display in the tape recording mode Remove the lens cap. ( -83- (When the camera is turned on with the lens cap fitted, the automatic white balance adjustment may not function properly. Please turn the camera on after removing the lens cap.) When this unit is purchased, the aspect ratio is...
Record mode ≥If the cassette tape has no blank part, then the Recording check camera will stop at the end of the tape. The last image recorded is played back for 2 to ≥The camera stops at a point approx. 1 second 3 seconds.
Record mode Recording still pictures onto a card ª To record still pictures clearly ≥When zooming in on the subject with a (Photoshot) magnification of 4k or higher, it is difficult to ≥Set to Card Recording Mode. reduce the slight shaking from holding the movie camera by hand.
Record mode ≥When the scene lacks contrast. ª Select the size of still pictures to be ≥When recording on tape. recorded on a card Set [BASIC] >> [PICTURE SIZE] >> select ª Concerning the focusing area the desired picture size. ≥When there is a contrasting object ahead or REC ASPECT [16:9]: behind the subject in the focus area, the subject...
Record mode ª Recording yourself Digital zoom function If the zoom magnification exceeds 10 times, then You can record yourself while viewing the LCD the digital zoom function will be activated. The monitor. You can record persons in front of the digital zoom function allows you to select a camera while presenting them the image.
Record mode ≥The backlight compensation is cancelled when Soft skin mode you activate the colour night view function. This allows the skin colour to be recorded in a Colour night view function softer tone. This is more effective if you record the bust image of a person.
Record mode Tele macro function Fade in/fade out function By focusing only on the subject and blurring the Fade in background, the image can be impressive. This The image and audio gradually appear. camera can focus on the subject at a distance of Fade out approx.
Record mode ª Anti-Ground-Shooting (AGS) To cancel fading Select the [ ] icon again. This function prevents unnecessary recording ≥The [FADE OFF] indication appears on the when you forget to pause recording and walk with screen of the movie camera. the camera tilted upside down while recording ª...
Record mode Self-timer recording Wide/4:3 Function You can record still pictures on a card using the This allows you to record images compatible with timer. wide-screen TVs. ≥Set to Card Recording Mode. Wide Function Press the joystick to display the icon. Move Images are recorded with a 16:9 aspect ratio.
Record mode Image stabilizer function Recording in various situations (Scene mode) Reduces the image shaking due to hand movement when recording. When you record images in different situations, ≥Set to Tape/Card Recording Mode. this mode automatically sets optimum shutter Set [ADVANCED] >> [O.I.S.] >> [ON]. speeds and apertures.
Record mode Recording in natural colours Sports mode ≥For slow-motion playback or playback pause (White balance) of recorded pictures, this mode presents free The automatic white balance function may not of camera shakes. ≥During normal playback, the image reproduce natural colours depending on the scenes or lighting conditions.
Record mode ≥When the camera is turned on with the lens cap Manual focus adjustment fitted, the automatic white balance adjustment If auto focusing is difficult due to the conditions, may not function properly. Please turn the then manual focusing is available. camera on after removing the lens cap.
Record mode Manual shutter speed/aperture Manual shutter speed adjustment ≥Avoid recording under fluorescent light, mercury adjustment light or sodium light because the colour and Shutter Speed brightness of the playback image may change. ≥If you increase the shutter speed manually, the Adjust it when recording fast-moving subjects.
Playback mode Playback mode ª To adjust volume Adjust the speaker volume for playback. Playing back tape Move the [j /VOLi] lever to adjust the volume. ≥Set to Tape Playback Mode. (An operation icon automatically appears on the LCD monitor.) Operate with joystick.
Playback mode ≥The pause icon appears for an instant. Slow-motion playback/ Continuous frame-by-frame playback will start frame-by-frame playback after the pause icon disappears. ≥Set to Tape Playback Mode. (Slow-motion ª To return to normal playback playback can only be performed by using Press the [PLAY 1] button on the remote control the remote control.) or move t he joystick up to the [1] icon to start...
Playback mode Playback on TV Move the joystick up to select the [1/;] icon to start playback. Images recorded by this camera can be played ≥The image and audio are output on the TV. back on a TV. Move the joystick down to select the [∫] ≥Insert a recorded tape or card into this icon to stop playback.
Playback mode Playing back card ª To display multiple playback files Multiple files on the card (6 files on 1 screen) are ≥Set to Card Playback Mode. displayed. (An operation icon automatically appears on Move the [s /VOLr] lever to switch the the LCD monitor.) images.
Playback mode Deleting files recorded on a card ª To delete all files Move the joystick down to select [ The deleted files cannot be restored. ≥Set to Card Playback Mode. Move the joystick left or right to select a file to delete.
Playback mode Formatting a card Writing the printing data on a card (DPOF setting) Please be aware that if a card is formatted, then all the data recorded on the card will be erased. You can write the data of pictures to be printed, Store important data on a personal computer, etc.
Edit mode Edit mode Copying onto a DVD recorder or a VCR (Dubbing) Recording from a tape onto a card Pictures recorded by the movie camera can be Still pictures can be recorded on a memory card stored on a DVD-RAM or other such media. Refer from scenes that have already been recorded on to the instructions for the recorder.
Edit mode ≥If you record (dub) images onto another video Using the DV Cable for Recording device and then play them back on a wide- (Digital Dubbing) screen TV, the images may be stretched By connecting other digital video equipment with vertically.
Edit mode ª Audio dubbing To cancel the standby for recording When the camera is standby for recording, move You can add music or narration to the recorded the joystick down and select the [∫] icon or press cassette. the [∫] button on the remote control. (Audio dubbing can only be performed by using the remote control.) ≥Do not plug or unplug the DV cable during...
Edit mode ≥When no card is inserted in the movie camera, ª Before recording with audio dubbing ≥Set to Tape Recording Mode. the [PictBridge] indication does not appear. ≥When you want to preserve the original sound (You cannot print any pictures.) ≥When the movie camera and the printer are not taken during recording, set [ADVANCED] >>...
Page 123
Edit mode ª When you stop printing halfway Move the joystick down. ≥Avoid the following operations during printing. These operations disable proper printing. ≥Disconnecting the USB cable ≥Removing the card ≥Switching the mode dial ≥Turning off the power ≥Check the settings for the paper size, quality of print, etc.
English for the sake of personal computer with the DV cable. example, other languages are supported as well. ≥In this manual, the Panasonic make digital video camera with USB terminal is referred to as movie camera. ≥These instructions do not cover the basic operations of the personal computer or define any terms.
Page 125
With a PC °2 The personal computer you use should ª Check before Use comply with USB port (Hi-Speed The software available and the drivers required USB(USB 2.0)). vary depending on the OS of the personal °3 Available only on Windows XP SP2 computer.
Page 126
≥If the installed version is not latest, update it by First] from [start] >> [All Programs (Programs)] performing the Windows update. >> [Panasonic] >> [SweetMovieLife 1.0E]/ ≥Depending on the security setting on PC, proper [MotionDV STUDIO 5.6E LE for DV], and read communication will not be possible.
With a PC Install/Connection Depending on your personal computer, one of the following screens may appear. ª Installing USB Driver 1 Your personal computer does not support USB Install this when your OS is Windows XP SP1, or port (Hi-Speed USB(USB 2.0)) so the video on Windows 2000 SP4.
Page 128
With a PC ≥When you use Windows 2000 (SP4) to connect Click [SweetMovieLife 1.0E]. the personal computer and the movie camera by USB cable and then use MotionDV STUDIO, installing the USB driver is needed. Insert the supplied CD-ROM into the personal computer’s CD-ROM drive.
Page 129
With a PC ≥It is required to use the driver for which Check [Install from a list or specific location [Microsoft] is displayed on [Driver Provider] (Advanced)] and then click [Next]. in [Driver] tab. Select [start] >> [Settings] >> [Control Panel] to start [System].
SweetMovieLife/MotionDV STUDIO For details on how to use the software applications, read the help file. Set [start] >> [All Programs (Programs)] >> [Panasonic] >> [SweetMovieLife 1.0E] or [MotionDV STUDIO 5.6E LE for DV] >> 1) USB cable [Manual(PDF format)]. 2) USB terminal Select [start] >>...
Page 131
Set [BASIC] or [ADVANCED] >> [USB FUNCTION] >> [WEBCAM]. Select [start] >> [All Programs (Programs)] Connect the movie camera to personal >> [Panasonic] >> [SweetMovieLife 1.0E]/ computer with auxiliary USB cable. [MotionDV STUDIO 5.6E LE for DV] >> [SweetMovieLife]/[MotionDV STUDIO LE for DV].
With a PC Others Start the Windows Messenger/MSN Messenger/Windows Live Messenger. ≥Click [start] >> [Programs] >> [Windows ª Copying files to a personal computer Messenger]/[MSN Messenger]/[Windows Live Card reader function (Mass storage) Messenger]. If you connect the movie camera to a personal computer with the USB cable, you can use the ≥To send pictures recorded on a tape to other movie camera which includes a card as a external...
Page 133
With a PC Note on the folder structure of the card Verify [Matshita DVC USB Device] is selected and click [OK]. A card formatted with the movie camera is composed by folders as described in the illustration below. DCIM 100CDPFP MISC [100CDPFP]: The images (IMGA0001.jpg, etc.) in ≥Click [Close], and you can safely disconnect the...
Page 134
With a PC ª ª Using on Macintosh Notes ≥Do not disconnect USB cable while the status Operating environment on iMovie 4/iMovie HD indicator of the movie camera is on. It may freeze the software or destroy the data in With pre-installed;...
Menu Menu ª [TAPE PLAYBACK MENU] Menu list Menu figures and illustrations are provided for easy-to-understand explanations, and so they are different from the actual menu indications. ª [TAPE RECORDING MENU] 1) [BASIC] [DATE/TIME] -137- [USB FUNCTION] -130- 2) [ADVANCED] [REC SPEED] -99- [REC STDBY]...
Menu Menus related to taking pictures you use the movie camera, turn it on again. ≥In the following cases, the power may not turn ª [DATE/TIME] off even when set [POWER SAVE] >> This switches between date and time indications. ≥The movie camera automatically records the [5 MINUTES].
Others Others Indoor mode (recording under incandescent lamp) -110- Indications Outdoor mode -110- White balance adjustment mode Various functions and the movie camera status -110- are shown on the screen. Basic indications Playback indications Remaining battery power ¥: Recording underway 0h00m00s00f: Time code Playback -113-...
Others ≥For images not recorded with this unit, the WRONG TAPE FORMAT: number of horizontal and vertical pixels may You are attempting to play back a tape differ so the image size is not displayed. section that has been recorded with a different TV system.
Others Functions cannot be used CHANGE MODE TO USE USB: The USB cable is connected to the movie simultaneously camera in Card Recording Mode. Some functions in the movie camera are disabled DISCONNECT USB CABLE: or cannot be selected due to its specifications. You are attempting to turn the mode dial in The table below shows examples of functions PC Connection Mode with the USB cable...
Others Before requesting repair (Problems 4: Battery runs down quickly. • Is the battery fully charged? Charge it with the and solutions) AC adaptor. ( -84- Power/Body • Are you using the battery in an extremely cold 1: The movie camera power cannot be turned place? The battery is affected by ambient temperature.
Page 142
Others Recording 3: The remaining tape time indication 1: Recording does not start although power is disappears. supplied to the movie camera and the • The remaining tape time indication may cassette is correctly inserted. disappear temporarily during frame-by-frame • Is the accidental erasure prevention slider on playback or other operation.
Page 143
Others 4: The original sound was erased when audio Card dubbing was performed. 1: Recorded pictures are not clear. • If you perform audio dubbing on a recording • Have you set [BASIC] >> [PICT.QUALITY] >> made in [16bit] mode, the original sound will be ]? If recording is done with it set to [ erased.
Others 2: “PUSH THE RESET SWITCH” is displayed. 6: The warning/alarm indication [°] appears • An irregularity in the movie camera has been when the camera is operated in the WEB automatically detected. Remove the cassette camera mode. or the card for data protection and then press •...
Page 145
Others ª When the lens temperature becomes close to the About the movie camera ≥When the movie camera is used for a long time, ambient temperature, the fogging disappears naturally. the camera body becomes warm, but this is not a malfunction. ª...
Page 146
Others While carrying the movie camera, do not drop Be sure to detach the battery after use ≥If the battery is left attached to the movie or bump it. ≥A strong impact on the movie camera may camera, a minute amount of current is break its housing, causing it to malfunction.
Page 147
Others ª About the AC adaptor Keep the cassette away from strong ≥If the battery is warm, charging requires more magnetism. ≥Apparatuses using magnets such as magnetic time than normal. ≥If the temperature of the battery is extremely necklaces and toys have magnetic force that is stronger than expected, and they may erase the high or extremely low, the [CHARGE] lamp may contents of a recording or may increase noise.
Others ª Explanation of terms LCD monitor/viewfinder LCD monitor ≥When the LCD monitor gets dirty, wipe it with a ª Automatic white balance dry soft cloth. White balance adjustment recognizes the colour ≥In a place with drastic temperature changes, of light and adjusts so the white colour will condensation may form on the LCD monitor.
Page 149
Others ª White balance Recording a subject with one end located closer to the movie camera and the other end The image recorded by the movie camera may farther away from it become bluish or reddish under the influence of ≥As auto focus adjusts at the centre of an light sources.
CCIR: 625 lines, 50 fields PAL colour signal Audio Please confirm the latest information on the Recording system: following website. PCM digital recording http://panasonic.co.jp/pavc/global/cs 16 bit (48 kHz/2 ch), 12 bit (32 kHz/4 ch) Image sensor: (This Site is English only.) 1/6-inch 3CCD image sensor [Effective pixels]...
Page 151
Specifications AC adaptor VSK0651 Information for your safety Power source: AC 110 V to 240 V, 50/60 Hz Power consumption: 19 W DC output: DC 7.9 V, 1.4 A (Movie camera operation) DC 8.4 V, 0.65 A (Battery charging) Dimensions: 61 mm (W) 32 mm (H) 91 mm (D)
Page 152
VQT1A48 F1206Kk0 ( 8000 A ) Matsushita Electric Industrial Co., Ltd. Web site: http://panasonic.net...