Christie LX501 User Manual-Network Manual page 23

Network guide
Hide thumbs Also See for LX501:
Table of Contents
3.1 Projector Web Control - Network Settings (continued)
Item
Wired Setup
IP Configuration
DHCP ON
DHCP OFF
IP Address
Subnet Mask
Default
Gateway
DNS Server Address
Other Setup
Crestron e-Control
Click the [Apply] button to save the settings.
NOTE
• The new configuration settings are activated after restarting the
network connection. When the configuration settings are changed, you must
restart the network connection. You can restart the network connection from
Network Restart on the main menu (&41).
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
• The WEP Key, WPA passphrase and SSID settings will not be set if the invalid
characters are used.
• The projector does not allow both wireless and wired LAN to be connected to
the same network. Do not set the same network address for both wireless and
wired LAN.
Network Guide
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
Configures the wired LAN settings.
Configures network settings.
Enables DHCP.
Disables DHCP.
Configures the IP address when DHCP is disabled.
Configures the subnet mask when DHCP is disabled.
Configures the default gateway when DHCP is disabled.
Configures the DNS server address.
Configures other network settings.
Set whether to or not to use Crestron e-Control
If you choose Disable, the Logon window of Projector Web
Control and not the selection window will be displayed at first
of the Web Control.
21
Description
020-000475-02 Rev. 1 (06-2012)
3. Web Control
®
.

Hide quick links:

Table of Contents
loading

This manual is also suitable for:

Lw551iLwu501iLw401Lwu421Lx601i

Table of Contents