Christie LX501 User Manual-Network Manual
  1. Manuals
  2. Brands
  3. Christie Manuals
  4. Projector
  5. LX501
  6. User manual-network manual

Christie LX501 User Manual-Network Manual

Network guide
Hide thumbs Also See for LX501:
Table of Contents

Quick Links

See also: User Manual , Setup Manual
LX501/LW401/LWU421/
LX601i/LW551i/LWU501i
User Manual-Network Guide
020-000475-02
Table of Contents
loading

Related Manuals for Christie LX501

Summary of Contents for Christie LX501

  • Page 1 LX501/LW401/LWU421/ LX601i/LW551i/LWU501i User Manual-Network Guide 020-000475-02...

  • Page 3: User Manual

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i Projector LX501/LW401/LWU421/ LX601i/LW551i/LWU501i User Manual Network Guide User's Manual (detailed) - Network Guide Thank you for purchasing this product. This manual is intended to explain only the network function. For proper use of this product, please refer to this manual and the other manuals for this product.

  • Page 4: Table Of Contents

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i Contents Contents & Caution ..................4 1. Connection to the network ............5 1.1 System requirements ................. 5 1.1.1 Required equipment preparation ..................5 1.1.2 Hardware and software requirement for computer ............5 1.2 Quick connection ..................6 1.3 Manual network connection setting - Wired LAN -.
  • Page 5 LX501/LX601i/LW401/LW551i/LWU421/LWU501i Contents & 6. Network Bridge Function ............52 6.1 Connecting devices .................. 52 6.2 Communication setup ................53 6.3 Communication port ................. 53 6.4 Transmission method ................54 6.4.1 HALF-DUPLEX ......................54 6.4.2 FULL-DUPLEX ....................... 55 7. Other Functions ..............56 7.1 E-mail Alerts .....................

  • Page 6: Caution

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i Caution Caution To use the wireless network function of this projector, the designated USB wire- less adapter that is sold as an option is required. For precautions according to the standards and laws, refer to the documents that come with the adapter.

  • Page 7: Connection To The Network

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 1. Connection to the network 1. Connection to the network 1.1 System requirements 1.1.1 Required equipment preparation The following equipments are required to connect the projector to your computer through the network. ■ Common The projector: 1 unit, Computer : minimum 1 set ■...

  • Page 8: Quick Connection

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 1. Connection to the network 1.1 System requirements (continued) NOTE • The network communication control is disabled while the projector is in standby mode if the STANDBY MODE item is set to SAVING. Please connect the network communication to the projector after setting the STANDBY MODE to NORMAL.

  • Page 9: Manual Network Connection Setting - Wired Lan

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 1. Connection to the network 1.3 Manual network connection setting - Wired LAN - This section explains how to set it up manually. 1.3.1 Equipments connection Connect the projector and a computer with a LAN cable. * Before connecting with an existing network, contact the network administrator.
  • Page 10 LX501/LX601i/LW401/LW551i/LWU421/LWU501i 1. Connection to the network 1.3 Manual network connection setting - Wired LAN - (continued) 5) Right-click "Local Area Connection" to open the menu, and select "Properties". 6) Select "Internet Protocol Version 4 (TCP/IPv4)" and click [Properties]. 7) Select "Use the following IP address" and configure the IP address, Subnet mask and Default gateway for the computer accordingly.
  • Page 11 LX501/LX601i/LW401/LW551i/LWU421/LWU501i 1. Connection to the network 1.3 Manual network connection setting - Wired LAN - (continued) [About IP address] ■ Setting manually The Network address portion of the IP address setting on your computer must be the same as the setting on the projector. Also, the entire IP address on the computer must not overlap with that of the other devices on the same network, including the projector.

  • Page 12: Internet Option" Setting

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 1. Connection to the network 1.3 Manual network connection setting - Wired LAN - (continued) 1.3.3 “Internet Option” setting 1) Click “Internet Options” in “Network and Sharing Center” window to open “Internet Properties” window. 2) Click “Connections” tab and then click [LAN settings] button to open “Local Area Network (LAN) Settings”.

  • Page 13: Manual Network Connection Setting - Wireless Lan

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 1. Connection to the network 1.4 Manual network connection setting - Wireless LAN - Using the designated USB wireless adapter (option) on the projector enables the projector and computer to communicate in both the Ad-Hoc and Infrastructure modes. This section is intended to explain how to set up wireless LAN connection manually.

  • Page 14: Wireless Lan Connection Set Up

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 1. Connection to the network 1.4 Manual network connection setting - Wireless LAN - (continued) 1.4.2 Wireless LAN connection set up Using wireless LAN utility for Windows 7 standard. ® Wireless LAN initial settings for the projector is as follows.
  • Page 15 LX501/LX601i/LW401/LW551i/LWU421/LWU501i 1. Connection to the network 1.4 Manual network connection setting - Wireless LAN - (continued) 4) Select "Use the following IP address" and configure the IP address, Subnet mask and Default gateway for the computer accordingly. After setting is complete, click [OK] to close the window.
  • Page 16 LX501/LX601i/LW401/LW551i/LWU421/LWU501i 1. Connection to the network 1.4 Manual network connection setting - Wireless LAN - (continued) 5) Right-click "Wireless Network Connection" to open the menu, and select "Connect / Disconnect". 6) From the connectable wireless networks, select the SSID of the projector (set to "wireless"...

  • Page 17: Network Presentation

    • When the screen resolution of your computer is over specified, the computer image is shrunk in specified size as below before transferring to the projector. LX501, LX601i: 1024 x 768 (XGA) The other models: 1280 x 800 The transferred image is displayed as shrunk on the projected screen even if the panel resolution of the projector is larger than above.the panel resolution of...

  • Page 18: Web Control

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control 3. Web Control You can adjust or control the projector via a network from a web browser on a computer that is connected to the same network. NOTE • Internet Explorer 6.0 or later is required.

  • Page 19: Projector Web Control

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control 3.1 Projector Web Control 3.1.1 Logon To use the Projector Web Control function, you need to logon with your user name and password. Below are the factory default settings for user name and password. Logon window...

  • Page 20: Network Information

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control 3.1 Projector Web Control (continued) 3.1.2 Network Information Displays the projector’s current network configuration settings. Item Description Displays information common to both wireless and wired Common Information LAN. Projector Name Displays the projector name settings. Wireless Information Displays the current settings of wireless LAN.

  • Page 21: Network Settings

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control 3.1 Projector Web Control (continued) 3.1.3 Network Settings Displays and configures network settings. Item Description Common Setup Configures the settings common to wireless and wired LAN. Configures the name of the projector. The length of the Projector Name can be up to 64 alphanumeric characters.
  • Page 22 LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control 3.1 Projector Web Control - Network Settings (continued) Item Description Wireless Setup Configures the wireless LAN settings. Mode Select "Ad-Hoc" or "Infrastructure". IP Configuration Configures network settings. DHCP ON Enables DHCP. DHCP OFF Disables DHCP. IP Address Configures the IP address when DHCP is disabled.
  • Page 23 LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control 3.1 Projector Web Control - Network Settings (continued) Item Description Wired Setup Configures the wired LAN settings. IP Configuration Configures network settings. DHCP ON Enables DHCP. DHCP OFF Disables DHCP. IP Address Configures the IP address when DHCP is disabled.

  • Page 24: Port Settings

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control 3.1 Projector Web Control (continued) 3.1.4 Port Settings Displays and configures communication port settings. Item Description Network Control Port1 Configures command control port 1 (Port:23). (Port:23) Port open Click the [Enable] check box to use port 23.
  • Page 25 LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control 3.1 Projector Web Control - Port Settings (continued) Item Description SNMP Port Configures the SNMP port. Port open Click the [Enable] check box to use SNMP. Configures the destination of the SNMP Trap in IP format.

  • Page 26: Mail Settings

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control 3.1 Projector Web Control (continued) 3.1.5 Mail Settings Displays and configures e-mail addressing settings. Item Description Click the [Enable] check box to use the e-mail function. Send Mail Configure the conditions for sending e-mail under the Alert Settings.

  • Page 27: Alert Settings

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control 3.1 Projector Web Control (continued) 3.1.6 Alert Settings Displays and configures failure & alert settings. Item Description Cover Error The lamp cover has not been properly fixed. Fan Error The cooling fan is not operating. The lamp does not light, and there is a possibility that interior Lamp Error portion has become heated.
  • Page 28 LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control 3.1 Projector Web Control - Alert Settings (continued) The Alert Items are shown below. Item Description Configures the time to alert. Alarm Time (Only Lamp Time Alarm and Filter Time Alarm.) SNMP Trap Click the [Enable] check box to enable SNMP Trap alerts.

  • Page 29: Schedule Settings

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control 3.1 Projector Web Control (continued) 3.1.7 Schedule Settings Displays and configures schedule settings. Item Description Daily Configures the daily schedule. Sunday Configures the Sunday schedule. Monday Configures the Monday schedule. Tuesday Configures the Tuesday schedule. Wednesday Configures the Wednesday schedule.
  • Page 30 LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control 3.1 Projector Web Control - Schedule Settings (continued) The schedule settings are shown below. Item Description Schedule Click the [Enable] check box to enable the schedule. Configures the month and date. Date (Month/Day) This item appears only when Specific date (No. 1-5) is selected.
  • Page 31 LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control 3.1 Projector Web Control - Schedule Settings (continued) NOTE • After the projector is moved, check the date and time set for the projector before configuring the schedules. • The internal clock’s time may not remain accurate. Using SNTP is recommended to maintain accurate time.

  • Page 32: Date/Time Settings

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control 3.1 Projector Web Control (continued) 3.1.8 Date/Time Settings Displays and configures the date and time settings. Item Description Current Date Configures the current date in year/month/day format. Current Time Configures the current time in hour:minute:second format.
  • Page 33 LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control 3.1 Projector Web Control - Date/Time Settings (continued) Item Description Configures the time difference. Set the same time difference Time difference as the one set on your computer. If unsure, consult your IT manager. Click the [ON] check box to retrieve Date and Time SNTP information from the SNTP server and set the following items.

  • Page 34: Security Settings

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control 3.1 Projector Web Control (continued) 3.1.9 Security Settings Displays and configures passwords and other security settings. Item Description User Account Configures the user name and password. Configures the user name. User name The length of the text can be up to 32 alphanumeric characters.

  • Page 35: Projector Control

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control 3.1 Projector Web Control (continued) 3.1.10 Projector Control Operations of the projector can be performed with the items on the screen. The categories of the items are shown in the main menu. Most of the items have a submenu.
  • Page 36 LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control 3.1 Projector Web Control - Projector Control (continued) Item Description PICTURE BRIGHTNESS Adjusts the brightness setting. CONTRAST Adjusts the contrast setting. GAMMA Selects the gamma setting. COLOR TEMP Selects the color temperature setting. COLOR Adjusts the color setting.
  • Page 37 LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control 3.1 Projector Web Control - Projector Control (continued) Item Description INPUT (continued) COMPUTER IN - Selects the COMPUTER IN1 input signal type. COMPUTER IN1 COMPUTER IN - Selects the COMPUTER IN2 input signal type. COMPUTER IN2 FRAME LOCK - Turns the FRAME LOCK-COMPUTER IN1 function on/off.
  • Page 38 LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control 3.1 Projector Web Control - Projector Control (continued) Item Description AUDIO VOLUME Adjusts the volume setting. SPEAKER Turns the built-in speaker on/off. AUDIO SOURCE - Assigns the AUDIO SOURCE - COMPUTER IN1 input port. COMPUTER IN1 AUDIO SOURCE - Assigns the AUDIO SOURCE - COMPUTER IN2 input port.
  • Page 39 LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control 3.1 Projector Web Control - Projector Control (continued) Item Description OPTION SOURCE SKIP - Selects the Source Skip - COMPUTER IN1 setting. COMPUTER IN1 SOURCE SKIP - Selects the Source Skip - COMPUTER IN2 setting. COMPUTER IN2 SOURCE SKIP - LAN Selects the Source Skip - LAN setting.
  • Page 40 LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control 3.1 Projector Web Control - Projector Control (continued) Item Description OPTION (continued) REMOTE RECEIV. - Turns the remote receiv. front function on/off. FRONT REMOTE RECEIV. - Turns the remote receiv. rear function on/off. REAR REMOTE FREQ. -...

  • Page 41: Remote Control

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control 3.1 Projector Web Control (continued) 3.1.11 Remote Control The functions on the bundled remote control are assigned to the Web Remote Control screen. Do not attempt to control the projector with the projector's remote control and via Web Remote Control at the same time.
  • Page 42 LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control 3.1 Projector Web Control - Remote Control (continued) NOTE • The Web Remote Control does not support repeat function that performs an action while holding a button clicked down. • Since the repeat function is not available, click the button repeatedly as many times as you require.

  • Page 43: Projector Status

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control 3.1 Projector Web Control (continued) 3.1.12 Projector Status Displays the settings and status of the projector. Item Description Error Status Displays the current error status Lamp Time Displays the usage time for the current lamp. Filter Time Displays the usage time for the current filter.

  • Page 44: Crestron E-Control

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control ® 3.2 Crestron e-Control The Main window as shown above is displayed at first. However, if you have enabled User Password on the Tools window (&46), a dialog prompting you to enter the password as shown on the right will be displayed, and no operation is enabled until you have entered the password.

  • Page 45: Main Window

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control ® 3.2 Crestron e-Control (continued) 3.2.1 Main window You can operate the basic controls of the projector on this screen. NOTE • If the projector is in the standby mode, only the [Power] button can be operated.
  • Page 46 LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control ® 3.2 Crestron e-Control - Main window (continued) 3 Click a button and operate as follows. To show the hidden buttons, click the ◄ / ► icons at the left and right ends. Button Description Freeze Turns Freeze on/off.

  • Page 47: Tools Window

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control ® 3.2 Crestron e-Control (continued) 3.2.2 Tools window ® Configures the settings between the projector and Crestron control system. Click the [Exit] button to return to the Main window. NOTE • If two-byte characters are used, the input text or numbers cannot be set correctly.

  • Page 48: Admin Password

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control ® 3.2 Crestron e-Control - Tools window (continued) 3 Projector (continued) Configures the network settings of the projector. Item Description DHCP Enables DHCP. IP Address Configures the IP address when DHCP is disabled. Subnet Mask Configures the subnet mask when DHCP is disabled.

  • Page 49: Info Window

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control ® 3.2 Crestron e-Control (continued) 3.2.3 Info window Displays the settings and status of the projector. Click the [Exit] button to return to the Main window. 1 Projector Information Item Description Projector Name Displays the projector name settings.

  • Page 50: Help Desk Window

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control ® 3.2 Crestron e-Control (continued) 3.2.4 Help Desk window Sends/receives messages to/from the administrator for Crestron RoomView® Express. Button Description Send Sends a message. Check the received message. Network Guide 020-000475-02 Rev. 1 (06-2012)

  • Page 51: Emergency Alert

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 3. Web Control ® 3.2 Crestron e-Control (continued) 3.2.5 Emergency Alert When the administrator for Crestron RoomView Express sends out an alert ® message, it will be displayed on the screen. You can reply to the alert message via a chat format. Input a message in the box below the alert message, and click the [Send] button.

  • Page 52: My Image Function

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 4. My Image Function 4. My Image Function The projector can display still images that are transferred via the network. Transfer image data Display image data (ex. MY IMAGE transmission requires an exclusive application for your computer. Use the application to transfer the image data.

  • Page 53: Messenger Function

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 5. Messenger Function 5. Messenger Function The projector can display text data transferred via the network on the screen and play back audio data inside the projector. The text data can be displayed on the screen in two ways that displays the text transferred from the computer on real time, and the other chooses and displays the text data from the ones once stored in the projector.

  • Page 54: Network Bridge Function

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 6. Network Bridge Function 6. Network Bridge Function This projector is equipped with the NETWORK BRIDGE function to perform mutual conversion of a network protocol and a serial interface. By making use of the NETWORK BRIDGE function, a computer that is connected to the projector via wireless or wired LAN is able to control an external device via RS-232C communication using the projector as a network terminal.

  • Page 55: Communication Setup

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 6. Network Bridge Function 6.2 Communication setup To configure the setup of the communication using NETWORK BRIDGE for the projector, use items in the COMMUNICATION menu. Open the menu of the projector and select the OPTION - SERVICE - COMMUNICATION menu.

  • Page 56: Transmission Method

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 6. Network Bridge Function 6.4 Transmission method The transmission method can be selected from the menus, only when the NETWORK BRIDGE is selected for the COMMUNICATION TYPE. (&OPTION menu > SERVICE > COMMUNICATION in the Operating Guide) HALF-DUPLEX  FULL-DUPLEX 6.4.1 HALF-DUPLEX...

  • Page 57: Full-Duplex

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 6. Network Bridge Function 6.4 Transmission method (continued) NOTE • With using the HALF-DUPLEX method, the projector can send out 254 byte data as maximum at once. • If it is not required to monitor the response data from an external device and the RESPONSE LIMIT TIME is set to OFF, the projector can receive the data from the computer and send it out to an external device continuously.

  • Page 58: Other Functions

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 7. Other Functions 7. Other Functions 7.1 E-mail Alerts The projector can automatically send an alert message to the specified e-mail addresses when the projector detects a certain condition that is requiring maintenance or detected an error. NOTE • Up to five e-mail addresses can be specified.
  • Page 59 LX501/LX601i/LW401/LW551i/LWU421/LWU501i 7. Other Functions 7.1 E-mail Alerts (continued) 5) Click the [Alert Settings] on the main menu to configure the E-mail Alerts settings. 6) Select and configure each alert item. Refer to item 3.1.6 Alert Settings (&31) for further information.

  • Page 60: Projector Management Using Snmp

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 7. Other Functions 7.2 Projector Management using SNMP The SNMP (Simple Network Management Protocol) enables to manage the projector information, which is a failure or warning status, from the computer on the network. The SNMP management software will be required on the computer to use this function.

  • Page 61: Event Scheduling

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 7. Other Functions 7.3 Event Scheduling The scheduling function enables to setup scheduled events including power on / power off. It enables to be “self-management” projector. NOTE • You can schedule the following control events: Power, Input Source, My Image, Messenger, Slideshow. (&28) •...
  • Page 62 LX501/LX601i/LW401/LW551i/LWU421/LWU501i 7. Other Functions 7.3 Event Scheduling(continued) Schedule Settings (&27) Schedule settings can be configured from a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter “http://192.168.1.10/” into the address bar of the web browser, and select Projector Web Control from the selection window.
  • Page 63 LX501/LX601i/LW401/LW551i/LWU421/LWU501i 7. Other Functions 7.3 Event Scheduling(continued) Date/Time Settings (&30) The Date/Time setting can be adjusted via a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter “http://192.168.1.10/” into the address bar of the web browser, and select Projector Web Control from the selection window.

  • Page 64: Command Control Via The Network

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 7. Other Functions 7.4 Command Control via the Network You can configure and control the projector via the network using RS-232C commands. Communication Port The following two ports are assigned for the command control. TCP #23 (Network Control Port1 (Port: 23))
  • Page 65 LX501/LX601i/LW401/LW551i/LWU421/LWU501i 7. Other Functions 7.4 Command Control via the Network (continued) When the authentication setting is enabled, the following settings are required. (&32) 7) Click the [Security Settings] on the main menu. 8) Click the [Network Control] and enter the desired authentication password.

  • Page 66: Command Format

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 7. Other Functions 7.4 Command Control via the Network (continued) Command Format Command formats differ among the different communication ports. ● TCP #23 You can use the RS-232C commands without any changes. The reply data format is the same as the RS-232C commands. (&RS-232C Communication...
  • Page 67 LX501/LX601i/LW401/LW551i/LWU421/LWU501i 7. Other Functions 7.4 Command Control via the Network (continued) Reply Data format The connection ID (the data is same as the connection ID data on the sending data format) is attached to the RS-232C commands reply data. ...
  • Page 68 LX501/LX601i/LW401/LW551i/LWU421/LWU501i 7. Other Functions 7.4 Command Control via the Network (continued) Automatic Connection Break The TCP connection will be automatically disconnected after there is no communication for 30 seconds after being established. Authentication The projector does not accept commands without authentication success when authentication is enabled.

  • Page 69: Crestron Roomview

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 7. Other Functions ® 7.5 Crestron RoomView ® Crestron RoomView is a multi-user resource management program provided by Crestron Electronics, Inc. It is an application for managing and controlling the projector and other AV devices collectively. For details of Crestron RoomView , refer to the Crestron website.

  • Page 70: Troubleshooting

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 8. Troubleshooting 8. Troubleshooting Reference Problem Likely Cause Things to Check Page Number • Bring the computer and projector closer together. Weak radio signal • Radio waves won’t go – through concrete and metal (steel doors, etc.) If there is a wireless...

  • Page 71: Specifications

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 9. Specifications 9. Specifications Item Specifications Control software Dedicated computer application and Web browser Corresponding TCP/IP, DHCP client and HTTP server protocol Wireless LAN (IEEE802.11b/g/n) Network (Ad-Hoc and Infrastructure modes) Wired LAN(100Base-TX/10Base-T) WEP (64/128bit), WPA-PSK (TKIP/AES), Security WPA2-PSK (TKIP/AES), SSID ®...

  • Page 72: Warranty And After-Sales Service

    LX501/LX601i/LW401/LW551i/LWU421/LWU501i 10. Warranty and after-sales service 10. Warranty and after-sales service If a problem occurs with the equipment, please read 8. Troubleshooting (&68) section first and review all suggested check points. After that, please contact your dealer or service company, if you still have the problem. They will tell you what warranty condition is applied.
  • Page 74 Corporate offi ces USA – Cypress ph: 714-236-8610 Canada – Kitchener ph: 519-744-8005 Worldwide offi ces United Kingdom Eastern Europe Singapore Japan ph: +44 118 977 8000 ph: +36 (0) 1 47 48 100 ph: +65 6877-8737 ph: 81-3-3599-7481 France Middle East Beijing South Korea...

This manual is also suitable for:

Lw551iLwu501iLw401Lwu421Lx601i

Table of Contents