Table of Contents
de
en
Directions for
disposal
x Disposal of packaging
The packaging protects your appliance
against damage during transport. All
materials used are environmentally
compatible and reusable. Please help:
dispose of the packaging in an
environmentally friendly manner.
For current methods of disposal,
please contact your dealer or the local
authorities.
x Disposal of old
appliances
Old appliances are not valueless
waste.
Valuable raw materials can be
recovered through environmentally
responsible disposal.
This appliance is in accordance
with European Directive
2002/96/EC on old electrical and
electronic appliances (Waste
Electrical and Electronic
Equipment − WEEE). The
guideline provides a valid
framework for recovering and
utilising old appliances
throughout the EU.
Warning!
!
Handle worn out appliances as
follows:
1. Unplug the mains plug.
2. Cut the power cord and remove
along with the mains plug.
3. Do not remove the shelves and
containers. Leaving them intact
makes it more difficult for children
to climb in!
4. Never let children play with a worn
out appliance.
Risk of asphyxiation!
Refrigerators contain refrigerants and
the insulation contains gases.
Refrigerants and gases must be
disposed of properly. Do not damage
refrigerant tubing until such time when
it can be disposed of properly.
4
Scope of delivery
After unpacking the appliance, check
all parts for transport damage.
If you wish to make a complaint,
please contact the dealer from whom
you purchased the appliance or
customer services.
The scope of delivery includes the
following parts:
Refrigerator and freezer unit,
n
Features (vary depending on the
n
model),
Water connection hose,
n
Usage and assembly instructions,
n
Guarantee slip,
n
Information on energy consumption
n
and noises,
Bag of assembly materials.
n
Installation notes
Transport and installation
This appliance is heavy and must be
secured during transport and fitting.
Warning!
!
This appliance is very heavy. If the
appliance falls over during transport
and installation work, it can cause
serious injuries. At least two people are
required to install the appliance safely.
Keep the doors of the appliance shut
until the appliance is positioned and
level at its installation location.
Installation location
The appliance should be placed in a
dry room that can be ventilated. The
installation location should not be
directly exposed to the sun and should
not be near a heat source such as a
stove or radiator. If installation next to a
heat source is unavoidable, use a
suitable insulating plate or maintain the
following minimum distances from the
heat source:
3 cm from an electric or gas
n
cooker,
30 cm from oil or solid fuel cookers.
n
If the appliance is being installed next
to another refrigerator or freezer,
maintain a minimum distance between
the sides of the two appliances of
25 mm. This prevents the formation of
condensation.
If there is a cover or cupboard above
the appliance, there must be a gap of
10 mm to enable the appliance to be
pulled out if necessary.
The heated air must be able to escape
unimpeded from the rear of the
appliance.
If the appliance is being installed in the
corner of a room or in a niche, the
minimum required gaps (see section
"Device and installation dimensions")
at the sides of the appliance must be
observed so that the doors can be
opened all the way.
If adjacent kitchen units are deeper
than 75 cm, the minimum required
gaps at the side must be observed in
order to enable the entire door opening
angle to be used (see section "Door
opening angle").
Floor surface
Information!
The appliance is very heavy.
The floor at the installation location
must not sag. If necessary, reinforce it.
Empty weight:
Basic model
147 kg
- Quick Links:
- Repairing Minor Malfunctions Yourself
Hide quick links:
Table of Contents
