In this guide, we walk you through the simple process for setting up a full Dell PowerEdge C8000 chassis. We set up a full chassis in our own labs and also weighed various sled configurations to help you best determine what will work in your datacenter.
(Note: Refer to the Getting Started guide for additional installation details.) Figure 2: Rail and rack installation. http://www.dell.com/support/Manuals/us/en/19/product/poweredge-c8000 A quick and easy guide to setting up the Dell PowerEdge C8000 A Principled Technologies setup guide 4...
Re-insert the compute, storage, and power sleds. We recommend installing all chassis and sleds before beginning cable installation. Figure 3: Chassis installation. A quick and easy guide to setting up the Dell PowerEdge C8000 A Principled Technologies setup guide 5...
6. We recommend labeling power cables for quick identification in the future. 7. If the rack is not full, we recommend allowing space for future cabling. Figure 4: PDU installation. A quick and easy guide to setting up the Dell PowerEdge C8000 A Principled Technologies setup guide 6...
BMC management cable, you must open the sled and remove the hard drive carrier and tray. Figure 5 shows the BMC cable installed. Figure 5: BMC cable installation. A quick and easy guide to setting up the Dell PowerEdge C8000 A Principled Technologies setup guide 7...
Figure 6: Management port Ethernet cable installation. Figure 7: Rear BMC management port on chassis. Figure 8: Management port on compute sled. A quick and easy guide to setting up the Dell PowerEdge C8000 A Principled Technologies setup guide 8...
Page 9
(see Figure 9). Figure 9: Using a cable lacing arm to bundle cables. A quick and easy guide to setting up the Dell PowerEdge C8000 A Principled Technologies setup guide 9...
Group cables by function for better serviceability. Figure 11: Ethernet cable installation with 1Gb NIC connectors. Figure 10: C8220, C8220X GPU and C8220X compute sleds. A quick and easy guide to setting up the Dell PowerEdge C8000 A Principled Technologies setup guide 10...
When using 40GbE network adapters, the two embedded 1Gb NIC connectors may be unnecessary and therefore not connected. Figure 12: Ethernet cable installation with 40GbE connectors. A quick and easy guide to setting up the Dell PowerEdge C8000 A Principled Technologies setup guide 11...
The compute sleds connected to the other SAS connectors would not be able to access zone0 but instead access their dedicated zone drives. http://www.dell.com/support/Manuals/us/en/19/product/poweredge-c8000 A quick and easy guide to setting up the Dell PowerEdge C8000 A Principled Technologies setup guide 12...
Page 13
Stretching cables across the chassis is messier and can restrict airflow. http://www.dell.com/support/Manuals/us/en/19/product/poweredge-c8000 A quick and easy guide to setting up the Dell PowerEdge C8000 A Principled Technologies setup guide 13...
Racks have weight limits, so it is important to know how much your solution will weigh when you add your Dell PowerEdge C8000 and sleds. Figure 16 shows the weights of the C8000 chassis and components as measured in our labs, which can help you estimate the weight of your configuration.
Page 15
37 pounds to the configuration we set up. Please note that our weight results differed slightly from the Dell Web site specifications, which list the rack at 335 pounds. A quick and easy guide to setting up the Dell PowerEdge C8000...
LIABILITY, INCLUDING FOR DIRECT DAMAGES, EXCEED THE AMOUNTS PAID IN CONNECTION WITH PRINCIPLED TECHNOLOGIES, INC.’S TESTING. CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES ARE AS SET FORTH HEREIN. A quick and easy guide to setting up the Dell PowerEdge C8000 A Principled Technologies setup guide 16...