Table of Contents
22
en | Programming
4.3.4
Assistance and fire non priority
This command sets the assistance call and the fire alarm as non-priority calls. This means that
the last alarm is displayed, whatever its type. This is the default value.
1.
4.3.5
Special texts in German
This command sets special texts in German. The displayed criteria are:
–
–
1.
4.3.6
Standard texts in German
This command sets standard texts in German. This is the default value.
1.
4.4
Printer/display setup on the Relay Plus Unit
4.4.1
Access to the printer/display setup menu
NOTICE!
The printer/display setup can only be configured on a NurseCall Relay Plus Unit connected to
a NurseCall system via the RS-485 bus.
1.
¬
2.
¬ Parameter Nr. 00
RS-232 Output
3.
4.
F.01U.252.722 | V1 | 2011.12
Type the code 123992. The unit plays a melody and a confirmation message is displayed.
ASSISTANCE & FIRE
NONPRIORITY
BAD/WC instead of TECHNIK
HILFE-2 instead of NOTRUF2
Type the code 123007. The unit plays a melody and a confirmation message is displayed.
MULTITONE TEXTE
BAD/WC + HILFE-2
Type the code 123008. The unit plays a melody and a confirmation message is displayed.
STANDARDTEXTE
TECHNIK + NOTRUF2
Press
then
to access the programming menu.
OK:Program
¤:Info
Press
to enter the RS-232 output menu or
Press
to enter the printer/display setup. Press
Scroll with
and
–
None
–
Printer
–
DISPLAY ZETTLER
–
DISPLAY NORSK
£
to select one of the following:
User Manual
NurseCall Relay Unit
to check the RS-232 output setup.
to escape.
Bosch Security Systems
Table of Contents
