Table of Contents
Touchpad
Description
Touchpad
Before removing the touchpad, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
Top cover (see
▲
Remove the function board:
1.
Position the top cover upside-down.
2.
Remove the 2 Phillips screws (1) that secure the touchpad to the top cover.
3.
Remove the touchpad from the top cover (2).
4.
Guide the cable (3) through the opening in the top cover.
Reverse this procedure to install the touchpad.
Battery on page
27).
Top cover on page
29)
Spare part number
721518-001
Component replacement procedures
35
- Quick Links:
- Computer Major Components
Hide quick links:
Table of Contents
