Magazine Does Not Unlock Via Ocp Or Rmu - Fujitsu ETERNUS LT20 S2 Installing, Starting Up And Maintaining
Lto library
Hide thumbs
Also See for ETERNUS LT20 S2:
- User manual (70 pages) ,
- Manual (11 pages) ,
- Installing, starting up and maintaining (95 pages)
Table of Contents
Troubleshooting
5.4
Magazine Does not Unlock via OCP or RMU
If you are not able to remove the magazines using OCP and RMU, an
emergency release mechanism is available.
V
CAUTION
Use only in case of emergency!
1. Unplug the power cord from the library.
2. Find the access holes for the right and left magazines (see figure 69).
Figure 69: Access holes for the left and right magazine
No.
Description
1
Right magazine release
2
Left magazine release
3. To manually release the magazines, push the end of a straightened paper
clip into the access hole for the magazine at the back of the library. While
holding the paper clip, have a second person pull the magazine out of the
front of the unit (see figure 70).
ETERNUS LT20 S2
Magazine Does not Unlock via OCP or RMU
89
Table of Contents
Troubleshooting
