Table of Contents
Available languages
Available languages
Memory Full
When answering system memory is full, the system answers after 10 rings,
beeps and waits for you to enter the 3-digit security code. If you don't enter
the security code within 10 seconds, the phone hangs up.
You should erase some messages so the answering system can record
new messages.
NOTE: The unit also answers after the 10th ring if it is turned off. To access
the answering system, enter your 3-digit security code after you hear the beep.
Accessing the Answering System from Another Location
You can access your answering system from any touch-tone phone
by entering your 3-digit security code after you hear the outgoing
announcement.The unit will hang up after 3 failed attempts to input correct
security code.
1. Dial the telephone number to which the answering system is connected to.
2. Enter the security code after you hear the tone.
3. Follow the voice menu to use the answering system's remote functions.
The remote feature lets you perform the following functions:
To
Review message
Play back messages
Stop message playback
Erase message
Skip message
Turn off/on answerer
Review voice menu options
TIP: You can bypass the outgoing announcement by pressing any numbered
key on the touch-tone pad while the announcement is playing. Then, you can
enter your security code to access the answering system.
Press this Button
1
2
2
0 (during message playback)
3
4
7
25
Chapters
Table of Contents
