GE 900 MHz User Manual

40-channel 900 mhz caller id cordless telephone/answerer
Hide thumbs Also See for 900 MHz:
Table of Contents
Available languages

Available languages

26993/26994
40-Channel 900 MHz Caller ID
Cordless Telephone/Answerer
User's Guide
1
We bring good things to life.

Chapters

Table of Contents
loading

Summary of Contents for GE 900 MHz

  • Page 1 26993/26994 40-Channel 900 MHz Caller ID Cordless Telephone/Answerer User’s Guide We bring good things to life.
  • Page 2 FCC R EGISTRATION Your telephone equipment is registered with the Federal Communications Commission and is in compliance with parts 15 and 68, FCC Rules and Regulations. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the FCC Registration number and Ringer Equivalence Number (REN) for the equipment.
  • Page 3: Table Of Contents

    NTRODUCTION Your cordless telephone/answerer with Caller ID is designed to give you flexibility in use and high quality performance. To get the most from your new cordless telephone/answerer, we suggest that you take a few minutes right now to read through this instruction manual.
  • Page 4 ... 29 EMOTE CCESS ... 30 SING THE ANDSET NSWERER NDICATOR CREENING ALLS FROM THE ANDSET CCESSING THE NSWERER FROM ... 32 OCATION HANGING THE ECURITY EADSET AND PERATION ONNECTING A HEADSET TO THE HANDSET ONNECTING THE ... 35 HANGING THE ATTERY ATTERY AFETY...
  • Page 5: Getting Started

    Short telephone line cord Belt clip (provided with 26994 only) EGIN YSTEM 900 MHz CORDLESS TELEPHONE DIGITAL ANSWERER DAY/ PAGE CHECK HOUR MESSAGES 8.8.
  • Page 6: Nstallation

    TVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. If interference continues, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference.
  • Page 7 TONE OPER CHANNEL ANSW FLASH CAUTION: Use only the Thomson 5-2472(black)/5-2471(white) power supply that came with this unit. Using other power supplies may damage the unit. 900 MHz CORDLESS TELEPHONE DIGITAL ANSWERER DAY/ PAGE CHECK HOUR MESSAGES 8.8. CHARGE/ IN USE...
  • Page 8 6. Remove the wall mount bracket. Rotate it so that the bottom of the phone is flat. Reattach the wall mount bracket by inserting the tabs into the slots on the top of the unit first, and then snapping the bottom tabs into place. 7.
  • Page 9: Setup

    ETUP TAMP MESSAGES 8.8. CHARGE/ IN USE ANNOUNCE MEMO NEXT ERASE ANSWER ON/OFF ANSWER ON/OFF (answerer on/off) button MESSAGES indicator light CORDLESS TELEPHONE 900 MHz DIGITAL ANSWERER DAY/ PAGE CHECK HOUR Time set buttons...
  • Page 10: Setting The Rings

    ETTING THE PEAKER Use the VOL (volume) control to adjust speaker volume to a comfortable level. OICE NSTRUCTIONS If you need additional assistance, press the REVIEW button when you plug in the answerer and follow the voice instructions. ETTING THE Set the RING SELECT switch on the back of the unit to choose the number of times you want the phone to ring before the machine...
  • Page 11: Recording The Outgoing Announcement

    ECORDING THE NNOUNCEMENT For best results when recording, you should be about 9 inches from the microphone, and eliminate as much background noise as possible. 1. Make sure the answerer is ON. 2. Press and hold the ANNOUNCE button. You need to hold the button until you finish the announcement.
  • Page 12 ELEPHONE ETUP ETTING THE ISPLAY 1. Press and release PROG until SET LANGUAGE shows on the display. 2. Use the CID REVIEW buttons to change the display to the desired language. 3. When finished, press and release PROG again to store the setting and enter the Local Area Code menu.
  • Page 13: Cordless Phone Basics

    ORDLESS HONE AKING A The only two things you need to know to make a call are: • Press the TALK button before you dial. • Press TALK button or place the handset in the base to hang up. Otherwise, it works just like any other phone.
  • Page 14: Eceiving Aall

    ECEIVING A To answer a call you must press the TALK button on the handset before you can talk. LASH Use the FLASH button to activate custom calling services such as call waiting or call transfer, which are available through your local phone company.
  • Page 15: Ringer Switch

    NOTE: You can still page the handset with the ringer off. ANDSET TALK button PROG FORMAT MUTE TALK DIAL DELETE PAUSE REDIAL REVIEW PLAY/STOP SKIP RINGER switch WXYZ PQRS ERASE TONE OPER CHANNEL ANSW FLASH PAGE button 900 MHz CORDLESS TELEPHONE DIGITAL ANSWERER DAY/ CHECK HOUR PAGE...
  • Page 16: Aller

    ID F ALLER This unit receives and displays information transmitted by your local phone company. This information can include the phone number, date, and time; or the name, phone number, date, and time. The unit can store up to 40 calls for later review. ALLER WITH Provided you subscribe to Caller ID with...
  • Page 17: Reviewing Messages

    When the memory is full, a new call automatically replaces the oldest call in memory. NEW appears in the display for calls received that have not been reviewed. Time A.M. 10:51 EVIEWING ESSAGES As calls are received and stored, the display is updated to let you know how many calls have been received.
  • Page 18: Eleting Ecords

    ELETING ECORDS Use the DELETE button to erase the record currently shown in the display or all records. ELETING THE URRENT Press DELETE. The display shows DELETED . ELETING ECORDS 1. Press and hold DELETE. The display shows DELETE ALL? 2.
  • Page 19: Hanging The Umber

    HANGING THE The FORMAT button lets you change the format of the displayed number. The available formats are as follows. 7-digit 7-digit telephone number. 10-digit 3-digit area code + 7-digit telephone number. 11-digit long distance code “1” + 3-digit area code + 7-digit telephone number.
  • Page 20: He Emory Eature

    EMORY Store up to ten 24-digit numbers in memory for quick dialing. This memory feature is in addition to the 40 Caller ID records that can be stored in memory. TORING A UMBER IN EMORY The phone must be OFF when you store numbers.
  • Page 21 and 4 two times for H. If you're using two letters consecutively that are stored in the same number key, you must press FORMAT between the letters. For ex- ample, if you enter Barb, press 2 two times for B; press FORMAT; press 2 for A; 7 three times for R;...
  • Page 22: Ial

    IALING A TORED 1. Make sure the phone is ON by pressing the TALK button. 2. Press MEM. 3. Press the number (0-9) for the desired memory location. The number dials automatically. SING This feature allows you to call back Caller ID records that were previously stored.
  • Page 23: Chain Dialing Fromm

    HAIN IALING FROM Use this feature to make calls which require a sequence of numbers such as using a calling card for a frequently called long distance number. Basically, you dial each part of the sequence from memory. The following example shows how you can use chain dialing to make a call through a long distance service: The Number For...
  • Page 24: Inserting A Pause In The Equence

    NSERTING A IALING EQUENCE Press the REDIAL button to insert a delay in the dialing sequence of a stored telephone number when a pause is needed to wait for a dial tone (for example after you dial 9 for an outside line, or to wait for a computer access tone).
  • Page 25: Dvanced Eatures

    DVANCED EATURES HANNEL UTTON While talking, you might need to manually change the channel in order to reduce static caused by baby monitors, garage door openers, or other cordless phones. Press and release the CHANNEL button to advance to the next clear channel. EMPORARY This feature enables pulse (rotary) service phone users to access touch-tone services...
  • Page 26: Messages Indicator

    NSWERING This section discusses the buttons and features on the answering machine. ESSAGES NDICATOR The MESSAGES indicator shows you how many new messages you have. The ANSWER ON/OFF button must be on in order for the MESSAGES indicator to work. CREENING ALLS FROM THE BASE...
  • Page 27: Essage Layback

    ESSAGE LAYBACK The messages indicator lets you know when you have messages. To play messages, press PLAY/STOP. While a message is playing, you can do the following: • Press PLAY/ STOP to stop the message playback. • Press and release REVIEW to restart the current message; continue to press and release REVIEW to go to previous messages.
  • Page 28 • To erase a message from the handset: 1. Press ANSWER button on the handset. 2. Press PLAY/STOP on the handset (the 2 button). 3. Press ERASE on the handset (the 0 button) to erase the message that is playing. NOTE: Erased messages cannot be restored.
  • Page 29: Remote Access

    EMOTE CCESS This section explains two types of remote access: using the handset to access the answering machine and accessing the answering machine from another phone. The handset contains integrated buttons that enable you access the answering machine with the handset. You can also access your answering machine from any phone that is tone-dial compatible by entering a 3-digit security...
  • Page 30: Using The Handset

    SING THE ANDSET Press the ANSWER button to access the answering machine from the cordless handset. After you access the answerer, use the marked handset keys just as if you were pressing the corresponding buttons on the base (see "Answering Machine Operation" for details on functions).
  • Page 31: From The Accessing Thea

    CREENING ALLS FROM THE ANDSET Use the handset to screen calls even when you can't hear the answering machine. When the phone rings: 1. Press the ANSWER button to gain access to the answering machine. 2. Listen to the caller leaving a message. 3.
  • Page 32: Ocation

    CCESSING THE You can access your answering machine from a touch-tone phone by entering your 3-digit security code after you hear the outgoing announcement. 1. Dial the phone number for the answering machine. 2. Enter the security code after you hear the tone. 3.
  • Page 33: Hanging The

    HANGING THE The default security code for accessing the answerer from another location is 1 2 3. You must use the handset to change the security code. With the phone off, follow these steps: 1. Press ANSWER (the ANSWER indicator comes on).
  • Page 34: Eadset And

    EADSET AND ONNECTING A HEADSET TO THE HANDSET For hands free conversation, connect the headset (provided with 26994 only) to the HEADSET jack as shown. The handset receiver and microphone are disabled when the headset is connected. Adjust the headset to rest comfortably on top of your head and over your ear.
  • Page 35: Changing The Battery

    HANGING THE Make sure the telephone is OFF before you replace battery. 1. Remove the battery compartment door. 2. Disconnect the battery plug and remove the battery pack from the handset. 3. Insert the new battery pack and reconnect the battery plug.
  • Page 36: General Product Care

    ENERAL RODUCT To keep your telephone working and looking good, follow these guidelines: • Avoid putting the phone near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps). • DO NOT expose to direct sunlight or moisture. •...
  • Page 37 ANDSET NDICATORS The following indicators show the status of a message or of the unit. ERROR ENTER NAME DELETE ALL? DELETE CALL ID? DELETE MEMO? START/END UNKNOWN PAGING YOU BLOCKED REPT NO CALLER ID Caller information has been interrupted during transmission or the phone is excessively noisy.
  • Page 38: Nswer Status Indicators

    NSWER TATUS The following indicators show the status of the answerer. 0-59 CL (blinking) An (blinking) F (blinking) Six bars (blinking) NDICATORS Total number of messages. The voice time/day stamp needs set. Answerer off. Currently answering a call. Memory is full. Recording a memo or announcement.
  • Page 39: Roubleshooting

    ROUBLESHOOTING ORDLESS HONE Problem No dial tone Dial tone is OK, but can’t dial out Handset does not ring You experience static, noise, or fading in and out UIDE OLUTIONS Solution • Check installation: — Is the base power cord connected to a working outlet? —...
  • Page 40: Caller Id

    ORDLESS HONE Problem Unit beeps Memory Dialing doesn't work ALLER Problem No Display Caller ID Error Message OLUTIONS CONTINUED Solution • Place handset in base for 20 seconds; if it still beeps, charge battery for 12 hours. • Clean charging contacts on handset and base with a soft cloth, or an eraser.
  • Page 41: Answering Machine

    NSWERING ACHINE Problem Can’t hear messages, beep, etc. Time/Day setting stuck at 12 a.m Mon. Answers on 10th ring Incoming messages are incomplete Won’t respond to remote commands OLUTIONS Solution • Adjust speaker volume. • Set the time clock. • Make sure answerer is turned on.
  • Page 42 AUSES OF ECEPTION • Aluminum siding. • Foil backing on insulation. • Heating ducts and other metal construction that can shield radio signals. • You’re too close to appliances such as microwaves, stoves, computers, etc. • Atmospheric conditions, such as strong storms. •...
  • Page 43 NDEX Accessing the Answerer from another phone 32 Accessory Order Form 45 Answerer-in-Use Light 30 Answering Machine Operation 26 Answering Machine Setup 9 Answering Machine Solutions 41 Battery Safety Precautions 35 Before You Begin 5 Belt Clip 34 Call Back 22 Caller ID operation 16 Caller ID with Call Waiting 16 Causes of Poor Reception 42...
  • Page 44 Order form 45 Receiving a Call 14 Recording the Outgoing Announcement 11 Redial 13 Remote Access 29 Reviewing and deleting stored numbers 24 Reviewing Announcement 11 Ringer Switch 15 Screening Calls from the base 26 Screening Calls from the Handset 31 Service 42 Setting the Display Language 12 Setting the Local Area Code 12...
  • Page 47 IMITED ARRANTY What your warranty covers: • Any defect in materials or workmanship. For how long after your purchase: • One year. (The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whichever comes first.) What we will do: •...
  • Page 48 P.O. BOX 1976, Indianapolis, IN 46206 Model 26993/26994 © 1999 Thomson Consumer Electronics, Inc. 15433020 (Rev. 1 E/S) Trademark(s) ® Registered 99-39 Printed in China Marca(s) Registrada(s)
  • Page 49 26993/26994 Teléfono / Contestador Inalámbrico de 900 MHz con 40 Canales e Identificador de Llamadas (Caller ID) Guía del Usuario Creamos cosas buenas para la vida.
  • Page 50 NFORMACIÓN DE LA Su equipo telefónico de la ha sido registrado con la Comisión Federal de Comunicaciones (FCC) y está en acuerdo con las Partes 15 y 68 de las Regulaciones y Reglas de la FCC. Notificación a la Compañía Telefónica Local Al fondo de este equipo Ud.
  • Page 51 NTRODUCCIÓN Su teléfono/contestador inalámbrico está diseñado para darle flexibilidad de uso y rendimiento de la más alta calidad. Para aprovechar al máximo su nuevo teléfono/contestador inalámbrico, le sugerimos que se tome unos minutos ahora mismo para leer este manual de instrucciones. ONTENIDO NFORMACIÓN DE LA REGISTRACIÓN DE LA...
  • Page 52 ... 24 LMACENADOS ... 25 UNCIONES VANZADAS (“CHANNELS”) .. 25 OTÓN PARA ANALES ... 25 EMPORARIO ... 26 NDICADOR DE ENSAJES ILTRAR LAMADAS DESDE LA PERACIÓN DE LA ÁQUINA EPRODUCCIÓN DE ENSAJES ... 27 EMORIA LENA ORRAR ENSAJES ... 28 EJAR UN ECADO ...
  • Page 53: Antes De Empezar

    Cable corto de línea telefónica Gancho para cinturón (provisto unicamente con el modelo 26994) EGURIDAD 900 MHz CORDLESS TELEPHONE DIGITAL ANSWERER DAY/ PAGE CHECK HOUR MESSAGES 8.8.
  • Page 54: Instalación Sobres

    NSTALACIÓN SOBRE UPERFICIE LANA 1. Asegúrese de que la placa de montaje sobre pared está sujeta adecuadamente. 2. Programe el selector de T/P (tono/pulso) en la “T” para servicio de tono (touch-tone), o en la “P” para servicio de pulso (rotatorio). Si usted no sabe qué...
  • Page 55 PRECAUCIÓN: Use unicamente el cable de corriente Thomson 5-2472 (negro)/ 5-2471 (blanco) que es compatible con este aparato. El uso de otros cables de corriente puede resultar en daño al aparato. 900 MHz CORDLESS TELEPHONE DIGITAL ANSWERER DAY/ CHECK HOUR PROG...
  • Page 56 6. Quite la placa para montaje sobre pared. Gírela de manera que la parte de abajo del teléfono esté plana. Vuelva a colocar la placa para montaje simplementeintroduciendo las lengüetas dentro de las ranuras en la parte superior primero, y después ajustando en su sitio las lengüetas en la parte inferior.
  • Page 57: Ontestadora

    EÑAL DE MESSAGES 8.8. CHARGE/ IN USE ANNOUNCE MEMO NEXT ERASE ANSWER ON/OFF Contestador encendido/ apagado (Botón para encender/ apagar) Luz indicadora de mensajes (“MESSAGES”) CORDLESS TELEPHONE 900 MHz DIGITAL ANSWERER DAY/ PAGE CHECK HOUR Botones para programar la hora...
  • Page 58: Para Programar El Volumen De La Bocina

    ROGRAMAR EL OCINA Use el control “VOL” (volumen) para ajustar el volumen de la bocina a un nivel cómodo. NSTRUCCIONES DE Si usted necesita asistencia adicional, oprima el botón “REVIEW” cuando usted conecta el contestador y siga las instrucciones orales. ROGRAMAR LA IMBRE Coloque el selector del timbre (“RING...
  • Page 59: Saliente

    RABAR EL ALIENTE Para mejores resultados mientras graba, usted debe estar a alrededor de 9 pulgadas del micrófono, y elimine tanto ruido de fondo como le sea posible. 1. Asegúrese de que el contestador está activado (ON). 2. Oprima y sostenga el botón de saludo (“ANNOUNCE”).
  • Page 60: Eléfono

    ROGRAMACIÓN DEL ELÉFONO ROGRAMAR EL ANTALLA 1. Oprima y suelte el botón “PROG” hasta que la indicación “SET LANGUAGE” aparezca en la pantalla. 2. Utilice los botones “CID REVIEW” para cambiar la pantalla al idioma deseado. 3. Cuando haya terminado, oprima y suelte nuevamente el botón “PROG”...
  • Page 61: Eléfono

    NFORMACIÓN ACER UNA Las únicas dos cosas que usted necesita saber para hacer una llamada son: • Oprima el botón para hablar (“TALK”) antes de marcar. • Oprima el botón para hablar (“TALK”) o ponga el auricular sobre la base para colgar. Por lo demás, funciona igual que cualquier otro teléfono.
  • Page 62: Volume

    ECIBIR UNA Para contestar una llamada usted debe oprimir el botón para hablar (“TALK”) en el auricular antes de que usted pueda hablar. OTÓN DE ERVICIOS SPECIALES O (“FLASH”) Use el botón de centello (“FLASH”) para activar servicios especiales como llamada en espera o transferencia de llamada, que son disponibles a través de su compañía telefónica local.
  • Page 63 Botón para hablar (“TALK”) PROG FORMAT MUTE TALK DIAL DELETE PAUSE REDIAL REVIEW PLAY/STOP SKIP WXYZ PQRS ERASE TONE OPER CHANNEL ANSW FLASH Selector de timbre Botón localizador (“RINGER”) (“PAGE”) 900 MHz CORDLESS TELEPHONE DIGITAL ANSWERER DAY/ CHECK HOUR PAGE...
  • Page 64: Unciones Del

    UNCIONES DEL Este aparato recibe y muestra información transmitida por su compañía telefónica local. La información puede incluir el número telefónico, fecha y hora; o el nombre, número telefónico, fecha y hora. El aparato puede almacenar hasta 40 llamadas para ser revisadas después. DENTIFICADOR DE LAMADA EN SPERA...
  • Page 65: Ara Revisar Mensajes

    Cuando la memoria está llena, una llamada nueva automaticamente reemplaza a la llamada más antigua en la memoria. La indicación de llamada nueva ( “NEW” ) aparece en el visor para llamadas recibidas que no han sido revisadas. NOTA: Cheque con su compañía telefónica local con respecto a la disponibilidad de servicio de nombre.
  • Page 66: Llamadas

    ORRAR Use el botón “DELETE” para borrar el dato que se muestra actualmente en el visor o todos los datos. ORRAR EL Oprima el botón para borrar (“DELETE”). La pantalla muestra la indicación “DELETED.” ORRAR ODOS LOS 1. Oprima y sostenga el botón “DELETE”. La pantalla le pregunta si borra todos los archivos (“...
  • Page 67 AMBIAR EL ÚMERO El botón “FORMAT” le permite cambiar el formato del número mostrado en el visor. Los formatos disponibles son como sigue: 7-dígitos número telefónico de 7 dígitos. 10-dígitos código de área de 3 dígitos + número telefónico de 7 dígitos. 11-dígitos código de larga distancia 1 + código de...
  • Page 68: Emoria

    UNCIÓN DE Almacene hasta diez números de 24 dígitos en la memoria para marcado rápido. Esta función de la memoria es además de los 40 archivos para información del Identificador de Llamadas (Caller ID) que pueden ser almacenados en la memoria. LMACENAR UN ÚMERO EN LA El teléfono debe estar apagado (OFF)
  • Page 69: Almacenado

    el 4 tres veces para la I; oprima el 8 para la T; y el 4 dos veces para la H. Si usted está usando dos letras consecutivas que están almacenadas en la misma tecla numérica, usted debe oprimir el botón “FORMAT”...
  • Page 70: Almacenado

    ARCAR UN LMACENADO 1. Asegúrese de que el teléfono está encendido (ON), simplemente oprimiendo el botón para hablar (“TALK”). 2. Oprima el botón de memoria (“MEM”). 3. Oprima el número (0-9) para la localización de memoria deseada. El número se marca automaticamente. EGRESAR LA Esta función le permite contestar llamadas a los números que estaban previamente...
  • Page 71 ISCADO EN ADENA DESDE LA Use esta función para hacer llamadas que requieren una secuencia de números como el usar una tarjeta para llamar por teléfono o un número de larga distancia llamado frecuentemente. Basicamente, usted marca cada parte de la secuencia desde la memoria. El siguiente ejemplo le muestra cómo puede usted utilizar el discado en cadena para hacer una llamada a través de un servicio de larga distancia: El Número para...
  • Page 72: Iscado

    NTRODUCIR UNA EN LA ECUENCIA DE Oprima el botón “REDIAL” para introducir un retraso en la secuencia de discado de un número telefónico almacenado cuando una pausa es necesaria para esperar al tono de marcar (por ejemplo después de que usted marca 9 para obtener línea externa, o para esperar e tono de acceso en una computadora).
  • Page 73: Funciones Avanzadas

    UNCIONES OTÓN PARA (“CHANNELS”) Mientras usted está hablando, usted puede necesitar cambiar manualmente el canal para reducir la estática causada por monitores de bebé, control para abrir la puerta del garage, u otros teléfonos inalámbricos. Oprima y suelte el botón “CHANNEL” para avanzar al siguiente canal.
  • Page 74: Ndicador De

    PERACIÓN DE LA Esta sección se refiere a los botones y funciones de la máquina contestadora. NDICADOR DE El indicador de mensajes (“MESSAGES”) le muestra cuántos mensajes tiene usted. El botón “ANSWER ON/OFF” debe estar activado para que el indicador funcione. ILTRAR LAMADAS DESDE Usted puede filtrar llamadas entrantes,...
  • Page 75: Memoria Llena

    EPRODUCCIÓN DE El indicador de mensajes le hace saber cuando usted tiene mensajes. Para reproducir los mensajes, oprima “PLAY/STOP.” Mientras un mensaje se está reproduciendo, usted puede hacer lo siguiente: • Oprima el botón “PLAY/STOP” para suspender la reproducción del mensaje. •...
  • Page 76: Ejar Un

    • Para borrar un mensaje desde el auricular: 1. Oprima el botón para contestar (“ANSWER”) en el auricular. 2. Oprima el botón “PLAY/STOP” en el auricular (la tecla con el número 2). 3. Oprima el botón para borrar (“ERASE”) en el auricular (la tecla con el número 0) para borrar el mensaje que se está...
  • Page 77: Acceso

    CCESO EMOTO Esta sección explica los dos tipos de acceso remoto: el usar el auricular para tener acceso a la máquina contestadora y el tener acceso a la máquina contestadora desde otro teléfono. El auricular contiene botones integrados que le permiten tener acceso a la máquina contestadora con el auricular.
  • Page 78: Sar El

    SAR EL Oprima el botón “ANSWER” para tener acceso a la máquina contestadora desde al auricular inalámbrico. Después de que usted ha tenido acceso al contestador, use las teclas marcadas del auricular como si usted oprimiera las teclas correspondientes en la base (vea “Operación de la Máquina Contestadora”...
  • Page 79 ILTRAR DESDE EL URICULAR Use el auricular para filtrar llamadas, incluso cuando usted no puede escuchar la máquina contestadora. Cuando el teléfono timbra: 1. Oprima el botón “ANSWER” para tener acceso a la máquina contestadora. 2. Escuche a la persona que llama dejar un mensaje.
  • Page 80: Para Tener Accesoa

    ENER OCALIZACIÓN Usted puede tener acceso a su máquina contestadora desde un teléfono con modalidad de discado de tono (touch-tone), inscribiendo su código de seguridad de 3 dígitos después de que usted escucha el anuncio saliente. 1. Marque el número de teléfono para la máquina contestadora. 2.
  • Page 81: Ambiar El

    AMBIAR EL EGURIDAD El código de seguridad pre-programado de fábrica para tener acceso al contestador desde otra localización es 123. Usted debe utilizar el auricular para cambiar el código de seguridad. Con el teléfono apagado, siga los siguientes pasos: 1. Oprima el botón “ANSWER” (el indicador del contestador en uso se iluminará).
  • Page 82: Roche Del

    PERACIÓN DEL ONEXIÓN DEL URICULAR Para conversar sin sostener el auricular en la mano, conecte el audífono (provisto unicamente con el modelo 26994) al enchufe del audífono como se muestra. El receptor del auricular y el micrófono quedan deshabilitados cuando se conecta el audífono.
  • Page 83: Ambiar La

    AMBIAR LA Asegúrese de que el teléfono esté desactivado (OFF) antes de reemplazar la batería. 1. Quite la puerta del compartimento de la batería. 2. Desconecte el enchufe de la batería y saque el paquete de batería del auricular. 3. Introduzca el paquete de batería nuevo y vuelva a conectar el enchufe de la batería.
  • Page 84: Eneral Del

    UIDADO ENERAL DEL Para mantener su teléfono funcionando bien y con buena apariencia, observe las siguientes pautas: • Evite poner el teléfono cerca de calentadores (calefactores) de ambiente y dispositivos que generen interferencia eléctrica ejemplo, motores o lámparas fluorescentes). • No lo exponga a la luz solar directa o a la humedad. •...
  • Page 85 NDICADORES Los siguientes mensajes especiales indican el estado actual de un mensaje o del aparato: ERROR ENTER NAME DELETE ALL? DELETE CALL ID? DELETE MEMO? START/END UNKNOWN PAGING YOU BLOCKED REPT NO CALLER ID URICULAR La información de la persona que llama ha sido interrumpida durante la transmisión o el teléfono es excesivamente ruidoso.
  • Page 86: Del

    NDICADORES Los siguientes indicadores muestran el estado del contestador. 0-59 CL (parpadeando) An (parpadeando) F (parpadeando) Six bars (parpadeando) STADO Número total de mensajes. La marca de voz para indicar hora/fecha necesita ser programada. Contestador desactivado. Actualmente contestando una llamada. La memoria está...
  • Page 87: Etección De

    ETECCIÓN DE OLUCIONES PARA EL Problema No hay tono de marcar El tono de marcar está bien, • pero no da línea El auricular no timbra Usted experimenta estática, • ruido, o debilitamiento del sonido entrante o saliente VERÍAS ELÉFONO NALÁMBRICO Solución •...
  • Page 88: Oluciones Para El

    OLUCIONES PARA EL Problema El aparato pita El Discado de Memoria no funciona DENTIFICADOR DE Problema El visor no muestra nada Error en el Mensaje del Identificador de Llamadas ELÉFONO NALÁMBRICO Solución • Coloque el auricular en la base durante 20 segundos; si sigue pitando, cargue la batería durante 12 horas.
  • Page 89: Soluciones Para La

    OLUCIONES PARA LA Problema No se oyen los mensajes, tono, etc. La programación de la Hora/ • Está atorada en Lunes 12 a.m. Contesta en el 10o. timbre Los mensajes entrantes están Incompletos. No responde a los comandos • de tono remotos. ÁQUINA ONTESTADORA Solución...
  • Page 90: Ausas De Una Mala Recepción

    AUSAS DE UNA MALA RECEPCIÓN • Recubrimiento externo de la casa con aluminio. • Aislación con revestimiento de papel de aluminio. • Conductos de calefacción y otras construcciones de metal que paran las señales de radio. • Está demasiado cerca de los aparatos eléctricos como microondas, cocina, computadoras, etc.
  • Page 91: Ndice

    NDICE Acceso Remoto 29 Antes de empezar 5 Botón de Servicios Especiales o Centello (“FLASH”) 14 Botón Enmudecedor (“MUTE”) 14 Botón para Canales (“CHANNELS”) 25 Causas de una mala recepción 42 Cómo obtener servicios de mantenimiento 42 Compatibilidad con Audífonos 2 Conexión del Audífono al Auricular 34 Conexión del broche del cinturón 34 Cuidado General del Producto 36...
  • Page 92 Para Almacenar un Número en la Memoria 20 Para Borrar Datos 18 Para Borrar el Dato Actual 18 Para Borrar Mensajes 27 Para Borrar Todos los Datos 18 Para Cambiar el Código de Seguridad 33 Para Cambiar el Formato del Número 19 Para Cambiar la Batería 35 Para Cambiar un Número Almacenado 21 Para Dejar un Recado 28...
  • Page 95: Arantía Limitada

    ARANTÍA LIMITADA Lo que cubre su garantía: • Cualquier defecto en material o mano de obra. Por cuánto tiempo después de la compra: • Un año. (El periodo de garantía para unidades arrendadas se inicia con la primera renta o 45 días de la fecha del embarque a la firma de arrendamiento, lo que ocurra primero).
  • Page 96 P.O. BOX 1976, Indianapolis, IN 46206 Model 26993/26994 © 1999 Thomson Consumer Electronics, Inc. 15433020 (Rev. 1 E/S) Trademark(s) ® Registered 99-39 Printed in China Marca(s) Registrada(s)

This manual is also suitable for:

2699326994

Table of Contents