Table of Contents
Available languages
Available languages
8. Press the prog/select button to confirm the deregistration. HANDSET #
DEREGISTERED followed by HANDSET NEEDS REGISTRATION shows
in the display.
NOTE: If one or more handsets becomes lost, you should de-register all
handsets (globally) to ensure proper system operation.
1. Press and hold the base page button on the base until the charge/in use
indicator flashes and you hear a tone.
2. Press and hold the base page button again until the charge/in use
flashes rapidly.
3. Press and release the page button on the base. The charge/in use indicator
stops blinking and a confirmation signal is emitted which confirms all
handsets are de-registered. Then the base initializes again and each handset
displays HANDSET NEEDS REGISTRATION. You should also set the date/
time on the base answerer.
D
EFAULT
As you become familiar with this system, you may prefer to use the
system's original settings. Follow the steps to return to the factory settings.
1. Make sure your handset is in menu mode and it is OFF (not in
TALK mode).
2. Use the CID/VOL (
3. Press the prog/select button.
4. Use the touch-tone pad to select 1YES or 2NO , or press the CID/VOL (
) button to scroll to 1YES or 2NO . The default setting is NO .
or
26
DEREGISTRATION
HANDSET ?
DEREGISTERED
HANDSET NEEDS
REGISTRATION
or
) button to scroll to DEFAULT SETTING .
Chapters
Table of Contents
