Wash Cycle Information; Operating The Dishwasher - Bosch SHE43R52UC Use And Care Manual

Hide thumbs Also See for SHE43R52UC:
Table of Contents
Available languages

Available languages

Wash Cycle Information

Note: To save energy, this dishwasher has a "Smart Control" where the sensors in the dishwasher automatically adjust
the cycle length, temperature and water changes based on the amount of food soil and the incoming water tempera-
ture. The "Smart Control" makes decisions that can cause the cycle time and water usage to adjust intermittently.
Wash cycle times are based on 120°F water supply. If your household water supply is different than 120°F, your
dishwasher's cycle times may be impacted.
cycle time
cycle time with Sanitize
water consumption
wash temperature
rinse temperature
Note: Only sanitizing cycles (Heavy, Auto, Normal and Half Load) have been designed to meet the requirements of 6 for
soil removal and sanitization efficacy. There is no intention, either directly or indirectly, that all cycles have passed san-
itization performance tests.

Operating the Dishwasher

Start the dishwasher:
Open the door and press the On/Off button.
1
Select a cycle and desired options.
2
Close the door to begin the cycle.
3
Delay start (model dependent):
Open the door and press the On/Off button.
1
Select a cycle.
2
Press and hold the Delay Start button. Release when the desired delay time is shown in the display window.
3
Close the door to begin the cycle.
4
Cancel a cycle:
Open the dishwasher door just far enough to expose the control panel. Be careful of hot water that may splash
1
out.
Press and hold the two Cancel/Reset buttons for 3 seconds.
2
Close the door and wait approximately 1 minute until the dishwasher completes the cycle.
3
Open the door and press the On/Off button. You may now start a new cycle.
4
You could be seriously scalded if you allow hot water to splash out of the dishwasher. OPEN THE DOOR CARE-
FULLY during any wash or rinse cycle. Do not fully open the door until water noises have stopped.
Interrupt a cycle:
Open the dishwasher door just far enough to expose the controls panel. Be careful of hot water that may
1
splash out.
Press the On/Off button to turn the unit off.
2
Wait at least 10 seconds before fully opening the dishwasher door.
3
To resume the cycle, press the On/Off button and close the dishwasher door.
4
12
Table 2 - Wash Cycle Information
Heavy
Auto
135 min
95-119 min
135 min
105-135 min
23.2-27.4 L
10.4-22.5 L
6.1-7.2 gal
2.7-5.9 gal
66-72°C
55-72°C
151-162°F
126-162°F
72°C
65-72°C
162°F
156-162°F
WARNING
Normal
Express
115 min
30 min
125 min
not available
8.9-18.3L
13.1 L
2.4-4.8 gal
3.5 gal
50-69°C
45-72°C
122-156°F
113-162°F
45-69°C
50°C
113-156°F
122°F
Half Load
99 min
120 min
14.1-18.3 L
3.7-4.8 gal
55-72°C
126-162°F
72°C
162°F
Table of Contents
loading

Table of Contents