Dell 5230dn Mono Laser Printer Service Manual page 91
Service manual
Hide thumbs
Also See for 5230dn Mono Laser Printer:
- Quick reference manual (2 pages) ,
- Specifications (4 pages) ,
- User manual (193 pages)
Table of Contents
Error
code or
Error contents
message
244.65
Pick motor load error
Source = Media tray 4
244.66
Pick motor
underspeed failure
Source = Media tray 4
Description/Action
The pick motor has failed or
caused high mechanical load
due to paper jam or bind.
The pick motor does not rotate
at the specified speed.
Possible repair actions
1. Remove all media present
in media path.
2. Ensure media tray is not
overfilled.
3. Check, clean or replace the
pick rolls for wear and
excess contamination. Go
to
"Pick roll assembly
removal" on page
4-57.
4. Check all connections on
the pick arm assembly.
5. Check all connections on
the system card assembly.
6. Replace the pick arm
assembly if problem
remains. Go to
"Operator
panel door assembly
removal (T656)" on
page
4-49.
7. Replace system card
assembly if problem
"System
remains. Go to
card assembly removal"
on page
4-76.
1. Remove all media present
in media path.
2. Ensure media tray is not
overfilled.
3. Check all connections on
the pick arm assembly.
4. Check all connections on
the system card assembly.
5. Replace the pick arm
assembly if problem
remains. Go to
"Operator
panel door assembly
removal (T656)" on
page
4-49.
6. Replace system card
assembly if problem
remains. Go to
"System
card assembly removal"
on page
4-76.
Diagnostic information
2-57
- Quick Links:
- Power-On Reset Sequence
- Error Code Table 1
Hide quick links:
Table of Contents
