Control Lockout - GE J2S968 Owner's Manual
Self-cleaning dual fuel convection ranges
Hide thumbs
Also See for J2S968:
- Owner's manual (97 pages) ,
- Technical service manual (63 pages) ,
- Installation instructions manual (41 pages)
Table of Contents
Cleaningthe glass coolaop.
LOCK!UNLOCK
HOLD 3 SECONDS
Control Lockout
Begfin by locking the cooktop; see the
Control L ockout section.
Cleanyour cooktopafter
each spill. Use CERAMA
BRYTE ® CeramicCooktop
Cleaner.
Normal Daily Use Cleaning
ONLY use CERAMA BRYTE®Ceramic
Cooktop Cleaner* on tile glass cooktop.
Other creams may not be as effective.
To maintain and protect tile surface of
your ,glass cooktop, follow these steps:
[]
Before using the cooktop for the
first time, clean it with CERAMA
BRYTE° Ceramic Cooktop Cleaner.*
This helps protect the top and
makes cleanup easier.
_]
Daily use of CERAMA BRYTE ®
Ceramic
Cooktop
Cleaner*
will
help keep the cooktop
looking
new.
%
Remove tile burner grates.
Shake die cleaning
cream well.
Apply a few drops of CERAMA
BRYTE ® Ceramic
Cooktop
Cleaner*
directly
to the cooktop.
[_]
Use a paper towel or CERAMABR}TE°
Cleaning Pad for Ceiamic Cooktops* to
clean the entire cooktop surface.
[_
Use a dry cloth or paper towel
to remove all cleaning
residue.
No need to rinse.
NOTE: I t is veryimportant that youDONOT heat
thecooktop u ntilit hasbeen cleaned thorought_
Use a CERAMA BRYTE c#Cleaning
Pad for Ceramic Cooktops.*
Burned-On Residue
WARNING:DAMAGE to yourglass surface
may occurif youusescrubpads otherthan the
pad includedwith yourcooktop.
[_
Allow tile cooktop to cool.
[_]
Remove tile burner grates.
[_
[_]
Spread a few drops of CERAMA
BRYTE®Ceramic Cooktop Cleaner*
oil the entire burned residue area.
[_
Using
a CERAMA BRYTE ®
Cleaning
Pad for Ceramic
Cooktops*, rub tile residue area,
applying pressure
as needed.
If any residue remains, repeat tile
steps listed above as needed.
For additional
i)rotection,
after all
residue
has been removed,
polish
the entire
surface
with CERAMA
BRYTE ® Ceramic
Cooktop
Cleaner*
and a paper
towel.
il _
_
_
The CERAMA BRYTE c#Ceramic
Cooktop Scraper* and all
recommended supplies are
available through our Parts Center.
See instructions under "To Order
Parts" section on next page.
NOTE:Do not use a dull or
nicked blade.
Heavy, Burned-On Residue
77
Allow
tile
cooktop
to cool.
_]
Remove tile burner gnates.
[_]
Use a single-edge razor blade
scraper at approximately
a 45 °
angle against the glass surface
and scrape tile soil. It will be
necessm T to apply pressure to tile
razor scraper in order to remove
tile residue.
[_
At_ei scraping with tile razor
scraper, spread a few drops of
CERAMA BRYTE ® Ceramic
Cooktop
Cleaner*
on tile entire
burned
residue area. Use a
CERAMA BRYTE ® Cleaning
Pad
for Ceramic Cooktops*
to remove
any remaining
residue.
For additional
protection,
after all residue has been
removed,
polish tile enGre
surface with CERAMA BRYTE ®
Ceramic
Cooktop Cleaner*
and a
paper towel.
,34
Table of Contents
