Dell Latitude E7240 Manual

Statement of volatility
Hide thumbs Also See for Latitude E7240:
Statement of Volatility – Dell Latitude E7240/E7440
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
The Dell Latitude E7240/E7440 contains both volatile and non-volatile (NV) components. Volatile components lose their
data immediately after power is removed from the component. Non-volatile (NV) components continue to retain their data
even after power is removed from the component. The following NV components are present on the Latitude E7240/E7440's
system board.
Table 1. List of Non-Volatile Components on System Board
Reference
Description
Designator
Embedded Flash
memory in
embedded
U38
controller
MEC5075
Panel EDID
Part of LCD panel
EEPROM
assembly
System BIOS
U1,U2
Connectors
System Memory –
JDIMMA and
DDR3L memory
JDIMMB
On memory
System memory
SoDIMM(s) – one
SPD EEPROM
or two present
RTC CMOS
UC1
Video memory –
UMA
type – see next
architecture- uses
column
system DDR3L.
Security Controller
U4 (up-sell USH
Serial Flash
daughter board)
Memory
Month yyyy
Volatility Description
256K and 2K byte of embedded
Flash memory for embedded
controller BIOS code, asset tag and
BIOS passwords
Non Volatile memory 64K bytes.
Stores panel manufacturing
information, display configuration
data
Non Volatile memory, 64Mbit
(8MB), 32Mbit (4MB) System BIOS
and Video BIOS for basic boot
operation, PSA (on board diags),
PXE diags.
Volatile memory in OFF state (see
state definitions later in text) One or
both modules will be populated.
System memory size will depend on
SoDIMM modules and will be
between 1GB to 8GB
Non-Volatile memory 2Kbit (256
bytes). One device present on each
SoDIMM. Stores memory
manufacturer data and timing
information for correct operation of
system memory.
Non Volatile memory 256 bytes
Stores CMOS information
Volatile memory in off state. UMA
uses main system memory size
allocated out of main memory.
Non Volatile memory, 16 Mbit
(2Mbyte)
User
Remedial
Accessible for
Action (action
external data
necessary
No
N/A
No
N/A
No
N/A
Power off
Yes
system
No
N/A
Remove the on-
No
board coin cell
battery
No Enter S3-S5
state below.
No
NA
loading

Summary of Contents for Dell Latitude E7240

  • Page 1 The Dell Latitude E7240/E7440 contains both volatile and non-volatile (NV) components. Volatile components lose their data immediately after power is removed from the component. Non-volatile (NV) components continue to retain their data even after power is removed from the component. The following NV components are present on the Latitude E7240/E7440’s system board.
  • Page 2 When the system is coming back to the working state, a restore file from the non- volatile storage can occur. The restore file has to be valid. Dell systems will be able to go to S4 if the OS and the peripherals support S4 state.

This manual is also suitable for:

Latitude e7440