Connecting A Decoder [C]; Connecting A Satellite Receiver Or Digital Receiver [D] - Panasonic DMR-E20 Operating Instructions Manual

Hide thumbs Also See for DMR-E20:

Table of Contents

Connecting a Decoder [C]

Decoder here refers to the device used to decode scrambled broadcasts (Pay TV).

(1)

(1) Decoder (not supplied)

(2) 21-pin Scart socket

(3) 21-pin Scart cable (not supplied)

Connect a 21-pin Scart cable (not supplied) to the AV2 21-pin Scart socket on the unit and

to the 21-pin Scart socket on the decoder.

Connect the decoder's mains lead to an AC mains socket.

Set "AV2 Connection" to "DECODER". (page 77)

Note

[RGB] means separate Red/Green/Blue colour signals. If you connect a TV equipped with RGB

input capability to the AV1 socket on this unit, and a decoder equipped with RGB output

capability to the AV2 socket, RGB signal will pass through the unit to the TV.

(1)

(1) Satellite receiver (not supplied)

(2) 21-pin Scart socket

(3) 21-pin Scart cable (not supplied)

Connect a 21-pin Scart cable (not supplied) to the AV2 21-pin Scart socket on the unit and

to the 21-pin Scart socket on the satellite receiver.

Connect the satellite receiver's mains lead to an AC mains socket.

Set "AV2 Connection" to "EXT", "Ext Link 1" or "Ext Link 2". (page 77)

Upgrading your system (continued)

(3)

(2)

(3)

(2)

Table of Contents