Table of Contents
Chapter 22, Tests Screen
ROM Programs
ROM Programs
Using the Signal Strength Meter
Figure 114
The Signal Strength Meter Screen
492
The Signal Strength Meter is accessed by loading and running the
program.
1. Select the TESTS (Main Menu) screen.
2. Move the cursor to the Select Procedure Location: field and choose ROM.
3. Move the cursor to the Select Procedure Filename: field and select
LVL_MTR.
4. Press the k3 key and enter the tune frequency (in MHz), then press the ENTER key. Do
not press a units (MHz, kHz, Hz) key. MHz is the default unit and cannot be changed.
The ANT IN port is always the signal source.
sigmeter.wmf
LVL_MTR
ROM
Table of Contents
