Table of Contents
Accessing the Call Processing Subsystem's Screens
Call Processing Subsystem's Screens
NOTE:
The ANALOG MEAS screen is used to make analog RF and audio measurements on the
mobile station while a link is active.
The Call Processing Subsystem screens are accessed by selecting
from the
menu on the Test Set's CRT (you may have to choose the
To Screen
choice to display the
More
The Call Processing Subsystem consists of five screens.
•
The CALL CONTROL is the primary Call Processing Subsystem screen. This screen
contains the fields used to configure the Test Set's parameters such as SAT Tone fre-
quency, control channel number, and system identification number. Call processing
functions such as registration, page, and handoff can be activated from this screen. The
transmit power of the mobile station can be set from this screen. Data messages re-
ceived from the mobile station are displayed on this screen.
•
The CALL DATA screen displays the decoded signaling messages received from the
mobile station on the reverse control channel and the reverse voice channel. Call pro-
cessing functions such as registration, page, and handoff can also be activated from this
screen. The transmit power of the mobile station can be set from this screen.
•
The CALL BIT screen allows the advanced user to modify the contents of the forward
control channel and forward voice channel messages.
•
The CALL CONFIGURE screen contains the fields used to configure various parame-
ters related to the Call Processing Subsystem, such as CMAX, Detector, and Input
Att.
Description of the Call Processing Subsystem
choice).
CALL CNTL
Chapter 6, Call Processing Subsystem
CALL CNTL
113
Table of Contents
