Introduction; Preparing To Use Network Features; Functions And Features; Operation Environment - Mitsubishi Electric LAN Control Utility User Manual
Lan control utility
Hide thumbs
Also See for LAN Control Utility:
- Operation manual (31 pages) ,
- User manual (30 pages) ,
- User manual (29 pages)
Table of Contents
1. Introduction
1.1. Preparing to use network features
This projector is equipped with the network function.
Before using the network function, perform the following 2 preparation steps.
• Installing the ProjectorView Global+
• Confi guring the projector IP address, network password, and network certifi cation settings
The projector IP address, network password, and network certifi cation settings can be confi gured in the projector
menu. For more information, see the section describing network settings provided in the projector's User Manual.
• It is recommended that you assign an IP address of the projector to the fi xed IP address and set DHCP
Function to Off.
• Set the IP addresses, subnet masks, and default gateways of the projectors and computer correctly. For
details, contact your network administrator.
• Be sure to make a note of the IP addresses and default gateways you set. If you forget the setting values, you
may not be able to detect the projectors again.
1.2. Functions and features
ProjectorView Global+
• 200 units of projectors can be remote-controlled at the maximum.
• Settings such as the IP address of the projector can be confi gured.
• You can register multiple projectors in a group and control them collectively.
• Various conditions of connected projectors can be monitored.
• Schedule of the power supply ON/OFF can be set every group.
• Schedule of the power supply ON/OFF can be set every day.
• When the communication with the projector monitored by the theft detector is disrupted, warning E-mail is
issued to the designated address.
• Message can be displayed on the screen of the operating projector. (Visual PA2 enabled projectors only)
• The projector is capable of reading aloud on-screen messages. (Text Speech enabled projectors only)
Web UI
• Each projector can be controlled and monitored separately using a Web browser.
• When an error or warning occurs with the projector, you can check its details.
1.3. Operation environment
• Supported OS
Windows XP, Windows Vista and Windows 7 (Operation on a 64bit version of any operating system isn't
guaranteed.)
• CPU
Higher than the minimum specifi cations for the above operating systems to work
• Memory
More than the minimum specifi cations for the above operating systems to work
• Free HDD space
32 MB or more (recommended)
• Web browser (When using Web UI)
Internet Explorer Ver. 8.0 and Ver. 9.0 (recommended)
(To use this function, install Adobe Flash Player on your computer. Download Adobe Flash Player from the
website of Adobe Systems Incorporated.)
EN-2
Table of Contents
