Page 1
OWNER’S MANUAL L26F6/L32F6/L42F6 TFT-LCD TELEVISION Please READ this manual carefully before operating your TV, and retain it for future reference.
Contents Contents Warning How to select the picture mode ........15 How to customize your own picture status ....15 Sound Control Functions ........16 Important Safety Instructions How to choose Digital tone mode ....... 16 How to customize your own sound status....17 Panel Control and Rear Terminals Timer Functions ..........18 Control...
Warning Warning WARNING RISK ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. * To avoid electric hazards, it is strongly suggested that the back cover not be opened, as there is no any accessory inside the casing.
Panel Control and Rear Terminals Control Panel Control and Rear Terminals Control - This is a simplified representation of front panel. - Here shown may be somewhat different from your TV. Panel Control Rear Terminals Control GOMPONENY PC AUDIO L AUDIO R VIDEO L AUDIO R VIDEO...
Remote Control Remote Control Battery loading 1. Slide open the cover of the battery compartment on the back of the remote controller. 2. Load two 7# (AAA) alkaline batteries in the compartment, (plus and minus poles to respective mark) 3. Replace the cover of the battery compartment. Precautions Make sure that two AAA alkaline batteries are loaded.
Remote Control Function Remote Control Function - The remote control cannot be operated unless the batteries are properly loaded. - When using the remote control, aim it at the remote control sensor on the TV. Function introduction Press this key to start TV from standby mode, press it again to return to standby 1 POWER mode.
External Equipment Connections External Equipment Connections Antenna Connection - Antenna or Cable Service without a Cable Box Connections. - For optimum picture quality, adjust antenna direction if needed. Note: * It is recommended that you'd better use 75Ω coaxial cable to remove the disturbance caused by airwave.
External Equipment Connections Choose Your Connection select the source, press the button to confirm. There are several ways to connect your television, DVD Setup depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of someways to connect your TV.
External Equipment Connections available. Then, make the corresponding audio connections. VGA/DVI AUDIO Pb/Cb Pr/Cr L-AUDIO-R How to use Turn on the digital set-top box. VIDEO L-AUDIO-R VIDEO L-AUDIO-R (Refer to the owner’s manual for the digital set-top box.) Use SOURCE on the remote contralto select PC or HDMI (Y, P ) mode.
External Equipment Connections External Equipment Connections / Basic Receiving and Playing Operations In the manual, the OSD (on screen display) may be When connecting with external audio equipments, different from your TV’s because it is just an example to such as amplifiers or speakers, please turn the TV help you with the TV operation.
Basic Receiving and Playing Operations option, and then press OK to enter submenu. to confirm the switching to TV input terminal. After switching, the signal source menu disappears, and at the Channel Edit upper right corner of screen displays the information of current signal source.
Basic Receiving and Playing Operations If you want to recover the skipped channel Exchange 1. Use Direct-digit Choosing button to select the number of the channel to be recovered. MENU on the remote control unit or MENU on Press 2. Do the above steps again. the TV’s front panel to display main menu, and then to set Skip as Off.
Basic Receiving and Playing Operations the TV set to adjust the volume level. The range is Due to different TV signal inputs, some items may need 0~100. When the volume buttons are pressed the to be adjusted. The following makes a description by only taking TV signal as an example.
Basic Receiving and Playing Operations Reset Contrast Return to factory default settings. Press This will adjust the intensity of bright parts in the select OK or Cancel, Press OK to affirmance. picture but keep the dark parts unchanged. Brightness Palette Standard This will adjust the light output of the complete...
Basic Receiving and Playing Operations How to customize your own Sound status MENU to display main menu on the screen, Press and then press to select the Sound menu, afterwards press OK/ to enter the option to be adjusted. Press to select the option to be adjust.
Basic Receiving and Playing Operations Timer Functions Setting of Current Time The current time is calculated from the moment upon turning the TV on. At first, check whether the time indicated on the TV's clock is consistent with the standard time of your time zone;...
Basic Receiving and Playing Operations MENU on the remote control unit or MENU OSD Menu Press on the TV's front panel to display the main menu, • Press to select the OSD Menu option. and then press to select the Timer menu, •...
Basic Receiving and Playing Operations Adjust Menu Press to set Demo Off/Demo /Demo The TV can be used as a display, and you may adjust Background relevant settings. Press SOURCE to switch the signal Press to set ON or OFF, if you select ON, the input to PC mode.
Basic Receiving and Playing Operations channel will be forcibly switched to the preset one How to use the password function upon turning the TV on; when the Preset Source is set as other signal sources, the TV will be forcibly switched to the preset source upon turning on.
Maintenance/Troubleshooting SOURCE on the remote control unit to select Press Press to select the Unlock option, and then USB option. press to clear all the lock settings, namely set all the lock setting options as OFF; the Preset Channel Insert USB equipment into corresponding USB is set as OFF and max volume returns to 100 (except interface 2s after starting the system.
Specification/Formatl You can choose the photos or music in different After entering USB main interface, press 3/ to files to play together. select MUSIC item. OK to confirm the selection and enter the Press Playing a Picture music file list. After entering USB main interface, press 3/...
Specification/Format Maintenance Maintenance Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. 3/...
Net Weight Consumption technologies. However, there might be some dank or bright (red, blue or green) spots, or some 658x200x488mm 7.8Kg L26F6 anomalistic stripes or spots. This is not defect. If the 115W 798x230x575mm 10Kg L32F6 TV set is used in an area 2,400 meters above the sea...
Maintenance / Troubleshooting/Specification 480i/480p Note Design and specifications are subject to change 576i/576p without notice. The dimension in this manual is a 720p 50/60 approximation. 1080i 50/60 Format Recommendatory HDTV/ SDTV(YP b P r /YC b C r ) format Sequence Refresh Format...
Page 27
Specification / Format LCD television Owner’s Manual...