Touch-Pen Mode - Panasonic TH-65PB1E Operating Instructions Manual

Set Touch Pen mode.

Select "Touch-Pen Mode" in "Setup" menu and press

Touch-Pen Mode

SLOT INPUT

HDMI

DVI

PC

NETWORK

Set "On" or "Off" for each input terminal.

If you switch to the input terminal that is set to "On", the mode becomes Touch Pen

mode.

"Touch-Pen: On" is displayed in Touch Pen mode.

Notes:

• When the following signal input, "Touch-Pen Mode" are disabled:

50i/50p/25p/24sF/24p signals and PC format signals with 50 Hz vertical frequency.

• The electronic pen cannot be used when VIDEO or COMPONENT input is selected.

• When using the electronic pen, adjust "Pos./Size" so that the screen of the computer can be correctly displayed.

(see page 25)

Setting the Remote Control

You can also turn Touch Pen mode On/Off with the FUNCTION buttons on the remote control. (see page 45)

In Touch Pen mode, the menus and functions are restricted as follows.

Pos./Size menu

Picture menu

3D Settings

Signal

Setup menu

Extended life settings

MULTI DISPLAY Setup

Portrait Setup

Options menu

ASPECT Controls

Digital Zoom

36

"SLOT INPUT" is displayed when an optional Terminal Board is installed.

When a Terminal Board with dual input terminals is installed, "SLOT INPUT A"

Off

and "SLOT INPUT B" are displayed.

Off

Off

Off

Off

button.

1:1 Pixel Mode: On

Over scan: Off

Picture Mode: "Normal" or "Dynamic" only. (see page 28)

3D Function: Off

FRAME CREATION: Off

Picture Mode: "Normal" or "Dynamic" only. (see page 28)

MULTI DISPLAY Setup: Off

Portrait Setup: Off

Display size: Unavailable

Rotate: Unavailable

16:9

Unavailable

Touch-Pen

On