Power On / Off - Panasonic TH-65PB1E Operating Instructions Manual

Connecting the AC cord plug to the Plasma Display.

Connecting the plug to the Wall Outlet

Notes:

• Main plug types vary between countries. The power

plug shown at right may, therefore, not be the type

¿ tted to your set.

• When disconnecting the AC cord, be absolutely

sure to disconnect the AC cord plug at the socket

outlet ¿ rst.

Press the Power switch on the Plasma Display to

turn the set on: Power-On.

Power Indicator: Green

[Starting up the network]

It takes some time for the network to start up just

after the power is turned on.

During that time, "Network Setup" in the "Setup" menu

is grayed out and cannot be set.

Press the

Power Indicator: Red (standby)

Press the

Power Indicator: Green

Turn the power to the Plasma Display off by pressing the

unit, when the Plasma Display is on or in standby mode.

Note:

During operation of the power management function, the power indicator turns

orange in the power off state.

button on the remote control to turn the Plasma Display off.

button on the remote control to turn the Plasma Display on.

+

INPUT

MENU

-/

VOL

/

ENTER/

Power Indicator

Remote Control Sensor

switch on the

15