Air Vents; Removable Broiler Drawer; Model - GE JGBS04 Owner's Manual & Installation Instructions
Non-self-cleaning gas ranges
Hide thumbs
Also See for JGBS04:
- Owner's manual and installation instructions (112 pages) ,
- Owner's manual & installation instructions (52 pages) ,
- Use and care & installation manual (49 pages)
Table of Contents
GEAppliances.com
Ventappearance andlocationvary.
Removable
Broiler
Drawer
Ionsome models)
Toremove:
Toreplace:
EZ] Whenthe broiler is cool,remove ang grid , Hold the broiler drawer in the raisedposition
and pan.
as gou slideit par(wag into the range.Then
lowerthe drawer and push it complete[g
[]
Pullthe broiler drawer out until it stops,
closed.
then pushit back in about one inch.
[]
Graspthe handle,lift and pull the broiler
drawer out. Cleanthe broiler drawerwith
hot, soapgwater.
Oven Air Vents
Never block the vents (air openings)of the
range.They providethe air inlet and outlet
thot are necessaryfor the range to operate
properlywith correct combustion.
Air Openings a re located at the rear of
the cOoktop, a tthe top and bottom of the
oven door and at the bottom of the range,
under the kick panel or broiler drawer
(dependingon the model/.
PuII the knob straight off(he stem,
LowerControl
Panel (Front Manifold
Panel) and Knobs
It's a good idea to wipe the control panel after
The control knobs may be removed for easier
each use of the oven_Usea damp cloth to
clean or rinse.For cleaning,use mild soap
and water or o 50/50 solution of vinegarand
water.Forrinsing, usecleon water. Polishdrg
witho soft cloth.
Do not use abrasive cleansers, strong liquid
cleaners, plastic scouring pads or oven
cleaners on the control panel-theg
wil
damage the finish.
Donot bend knobs bg pulling them up or
down or bg hanging a towel or other such
loads.Thiscon damage the gas valve shaft.
cleaning.
Hake sure the knobs ore in the OFF positions
and pull themstraight
off the stems for
cleaning.
The knobs can be cleaned in a dishwasher
or theg mog also be washed with soap and
water. Hake sure the insides of the knobs are
drg before replacing.
Replace the knobs in the OFF position to
ensure proper placement.
Hetai parts can be cleanedwith soap and
water. Donot use steelwool, abrasives,
ammonia, acids or commercial oven
cleaners.Drg with o soft cloth.
25
Table of Contents
