Msplmgmtactivate - HP StorageWorks MSA 2/8 - SAN Switch Reference Manual
Hp storageworks fabric os v3.1.x/4.1.x reference guide (aa-rs24c-te, june 2003)
Hide thumbs
Also See for StorageWorks MSA 2/8 - SAN Switch:
- Reference manual (394 pages) ,
- User manual (270 pages) ,
- Installation manual (72 pages)
Table of Contents
Fabric OS Commands
msPlMgmtActivate
Activate the Management Server Platform service on all switches in the fabric.
Synopsis
msPlMgmtActivate
Availability
Admin
Release
V3.1.x and V4.1.x
Description
This command enables an Admin user to activate the Management Server
Platform service on all switches in the fabric. HP recommends that you run the
msCapabilityShow command before issuing this command. If any switch
within the fabric is not capable of handling the Platform service, the
msPlMgmtActivate command is rejected. When this command is issued, all
the switches in the fabric will have the Platform service ENABLED.
Once activated, the activation is saved to the non-volatile storage of each switch,
so after a reboot, a switch will boot up with Platform service ENABLED. By
default, the Platform service is DISABLED.
Platform service is available in firmware v2.3 and above. Lower level firmware
releases do not support it.
Note:
FCS switch. See
Operands
None.
436
When security is enabled, this command can only be issued from the Primary
"Security
Commands" on page 941.
Fabric OS Version 3.1.x/4.1.x Reference Guide
Table of Contents
