Table of Contents
Quick Links
FLAT FACE COLOUR MONITOR
USER MANUAL
(DJ82)
MANUEL D'UTILISATION
BEDIENUNGSANLEITUNG
CM821FET
MANUAL DE USUARIO
MANUALE DI ISTRUZIONI
EasyMenu
with
!
EasyMenu is HITACHI's On Screen Display function for easy operation.
READ THE INSTRUCTIONS INSIDE CAREFULLY.
KEEP THIS USER MANUAL FOR FUTURE REFERENCE.
For future reference, record the serial number of your colour monitor.
SERIAL No.
The serial number is located on the rear of the monitor.
®
This monitor is E
compliant when used with a computer
S
NERGY
TAR
equipped with VESA DPMS.
®
The E
S
emblem does not represent EPA endorsement of
NERGY
TAR
any product or service.
®
As an E
Partner, Hitachi,Ltd. has determined that this
S
NERGY
TAR
®
product meets the E
S
guidelines for energy efficiency.
NERGY
TAR
Table of Contents
Related Manuals for Hitachi CM821FET
Summary of Contents for Hitachi CM821FET
-
Page 1: User Manual
MANUAL DE USUARIO MANUALE DI ISTRUZIONI EasyMenu with EasyMenu is HITACHI’s On Screen Display function for easy operation. READ THE INSTRUCTIONS INSIDE CAREFULLY. KEEP THIS USER MANUAL FOR FUTURE REFERENCE. For future reference, record the serial number of your colour monitor. -
Page 3: Table Of Contents
Colour Monitor (DJ82) CM821FET USER MANUAL Congratulations on your selection of a HITACHI Colour Monitor. Read the instructions inside carefully, and keep this user manual for future reference. NOTE: The information in this manual is subject to change without notice. -
Page 4: Features
FEATURES This Colour monitor provides the following features. Sharpest Focus and Highest Contrast Flat screen Enhanced Dot Pitch (EDP) CRT with anti-glare, dynamic focus circuit, dark glass and an INVAR shadow mask gives the sharpest focus and highest contrast to minimize eye fatigue. -
Page 5: Cautions
CAUTIONS Discontinue Use if Abnormal Operation Occurs ! Abnormal operations such as smoke, burning smell, excessive sound, etc. could cause fire or electrical shock. If you observe any abnormal operation, you should turn off the monitor and disconnect the power plug from the power outlet. You should check for smoke or fire and contact your dealer. - Page 6 CAUTIONS (Continued) CAUTION (for 200 - 240V operation only) This equipment relies on the protective devices in the building installation for short-circuit and power surge protection. Refer to the following table for the suitable number and location of the protective devices which should be present in the building’s installation. Informative examples of protective devices in single - phase equipment or sub-assemblies Protection...
-
Page 7: Fcc Statement Warning
CAUTIONS (Continued) FCC Statement Warning WARNING : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. -
Page 8: For The Customers In The Uk
CAUTIONS (Continued) For the Customers in the UK THIS PRODUCT IS SUPPLIED WITH A 2-PIN MAINS PLUG FOR USE ON MAINLAND EUROPE. FOR THE UK PLEASE REFER TO THE NOTES ON THIS PAGE. IMPORTANT FOR UNITED KINGDOM WORDING FOR CLASS ‡T EQUIPMENT INSTRUCTION BOOKS AND LABELS The mains lead on this equipment is supplied with a molded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. -
Page 9: Installation
INSTALLATION Before installing, carefully read the chapter “CAUTIONS”. Checking the contents Check whether the consignment agrees with the following packing list. Should you discover that the equipment has been damaged during transport, or that the consignment does not correspond with the delivery list, please notify your dealer immediately. Delivery Note: one Monitor one Power Cord one Signal Cable... -
Page 10: Connecting The Monitor
INSTALLATION (Continued) Connecting the monitor Rear View Front View to the power outlet of to the host the correct voltage computer 1. Installation Install the monitor in a suitable environment. Do not place the monitor on an unstable base. Do not expose the monitor to rain, moisture, dust, corrosive gases, vibrations, etc. so as to prevent electrical shock or fire hazard. -
Page 11: Operation
OPERATION Power ON/OFF Press the power switch to switch the power ON or OFF. When the power is ON, the power indicator will light up. NOTE: First turn on the monitor, then the computer. After turning OFF the power switch, wait at least 5 seconds before restarting the monitor. - Page 12 Brightness/Contrast Adjustment (1) Press one of the adjustment buttons when the OSD (On Screen Display) is not shown. The OSD function “EasyMenu” will then show the brightness and contrast settings. (2) To adjust these settings, use the adjustment buttons for brightness, and for contrast.
-
Page 13: Table 1-1. Adjustment Table
OPERATION (Continued) Table 1-1. Adjustment Table Item Adjustment Function button decreases the picture’s brightness . BRIGHTNESS increases the picture’s brightness . makes the picture’s contrast darker (not CONTRAST including the background). makes the picture’s contrast brighter (not including the background). change to the previous mode. - Page 14 OPERATION (Continued) Table 1-1. Adjustment Table (Continued) Item Adjustment Function button (MAIN MENU) shrinks the top side of the picture, TRAPEZOID and expands the bottom side of the picture. expands the top side of the picture, and shrinks the bottom side of the picture.
- Page 15 OPERATION (Continued) Table 1-1. Adjustment Table (Continued) Item Adjustment Function button (MAIN MENU) (no function) OSD EXIT clears the OSD. (YES) shrinks the picture horizontally and vertically. ZOOM expands the picture horizontally and vertically. changes to the previous mode. SCREEN MENU H.
- Page 16 OPERATION (Continued) Table 1-1. Adjustment Table (Continued) Item Adjustment Function button (SCREEN MENU) makes the horizontal dynamic focus weaker. H. FOCUS makes the horizontal dynamic focus stronger. makes the vertical dynamic focus weaker. V. FOCUS makes the vertical dynamic focus stronger. curves the left and right top corners of the picture TOP CORNER inwards.
- Page 17 OPERATION (Continued) Table 1-1. Adjustment Table (Continued) Item Adjustment Function button OSD MENU changes to the previous mode. OSD H. POS. •Ë LANGUAGE SELECT •Ë OSD V. POS. •Ë OSD H. POS. changes to the next mode. OSD H. POS. •Ë OSD V. POS. •Ë...
-
Page 18: Power Saving System
POWER SAVING SYSTEM ® This monitor complies with VESA and E power saving requirements. NERGY The power saving system works only when used with VESA DPMS compliant PC’s and/or graphic controllers. Table 1-2. Power Saving System VESA DPMS Power Saving States Power Saving Video H. -
Page 19: Troubleshooting
TROUBLESHOOTING The following Table 1-4 is provided to assist you with common installation issues. Table 1-4. Troubleshooting Symptom Solution No power Verify that the power cord is installed correctly. Press the power switch. Increase Contrast and Brightness. No picture Check Input Select status. No picture and the power indicator Check the Signal Cable Connection. -
Page 20: Specifications
SPECIFICATIONS 21 inch type picture tube, 0.21- 0.24 mm variable horizontal dot pitch, 0.20- 0.23 mm variable horizontal mask pitch, Invar shadow mask, Black matrix, Short persistence phosphors, Dark tint, Anti-Reflection coat. Input Signal Video 0.70 Vp-p, Analogue Sync. Separate H/V, TTL level Composite H/V, TTL level Synchronization Horizontal... -
Page 21: Table 1-5. Standard Settings
SPECIFICATIONS (Continued) Standard Settings Microprocessor-based user preset functions can store 32 sets of geometry settings. The following industrial standard settings have been pre- programmed by the factory. Table 1-5. Standard Settings Video Mode Name Horizontal (with Resolution and Vertical Frequency Frequency) 640 •~ - 70 Hz... -
Page 22: Table 1-6. Pin Assignment
SPECIFICATIONS (Continued) Pin Assignment Signal Input Connector of the Monitor Table 1-6. Pin Assignment Input 1 Input 2 Red Video Red Video Green Video Green Video Blue Video Blue Video No pin No pin No connection No connection Red Ground Red Ground Green Ground Green Ground... - Page 23 TCO’99 STATEMENT Congratulations! You have just purchased a TCO'99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. This product meets the requirements for the TCO'99 scheme which provides for an international environmental and quality labelling of personal computers.
- Page 24 Below you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from: TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): [email protected] Current information regarding TCO'99 approved and labelled products may also be obtained via the Internet, using the address: http://www.tco-info.com/ Environmental requirements Flame retardants...
- Page 25 Fax: +46 (0) 8 562 711 13 Tel: +39 02 38073415 Servizio Clienti Email: [email protected] Fax: +39 02 48786381/2 Email: [email protected] HITACHI EUROPE S.A.S HITACHI EUROPE LTD (Norway) AB Lyon Office STRANDVEIEN 18 B.P. 45, 69671 BRON CEDEX 1366 Lysaker FRANCE...