Table of Contents
TO PLAY A CD (THIS UNIT CAN PLAY STANDARD OR CDR/RW
DISCS)
1
Open the CD compartment lid by
pressing the CD OPEN button. Gently
press a disc, label side up, onto the
spindle until it locks in place. Close the
CD compartment lid. Insert headphones
into the Headphones jack.
3
2
Adjust the VOLUME control and DBBS
switch as desired. To skip forward or
backward through the tracks on the disc,
press the SKIP/SEARCH
button. To search forward or backward
through the tracks on the disc, press and hold
the SKIP/SEARCH
NOTES:
• This unit is capable of playing standard CDs or 3" singles; no adapter is required.
• If a disc is inserted incorrectly, dirty, damaged or not present at all, the display will
show "disc".
• As each track is played, the track number and elapsed time are shown in the display.
• To remove the disc, open the CD Compartment, hold the edge of the CD and gently
press the center spindle and lift the CD.
• The maximum time of a CD is 74 minutes for this unit.
• "OPEN" will appear in the display when the CD Door is opened.
• This unit will play standard or CDR/RW discs.
CD OPERATION
3
1
or
or
button.
2
While the unit is off, press the
PLAY/PAUSE (
to start playback. To pause PLAYBACK,
press the PLAY/PAUSE (
ON button again, the display will blink.
Press once again to resume playback.
4
When the disc is through playing, it will stop.
Press the STOP (I)/POWER OFF button to
stop the disc before it is finished; the total
number of tracks and playing time will
appear. Press the STOP (I)/POWER OFF
button again while in the stop mode to turn
the unit off or wait approximately 60 seconds
and the unit will automatically turn off.
7
)/POWER ON button
)/POWER
- Quick Links:
- Troubleshooting Guide
Hide quick links:
Table of Contents
