Setting the Flash
Set the flash for capturing images. The flash firing mode can be set to suit for the
photographic conditions.
1. Slide the mode switch to [
2. Toggle the
mode.
Setting the Self-timer
This setting allows images to be captured with the self-timer.
1. Slide the mode switch to [
dial to one of the photography modes.
2. Toggle the
Each press of the button moves the icon
one step through the sequence and
displays it on the screen.
For [Single] capture mode.
OFF [
[
For [
capture modes.
OFF [
3. Compose the image, press the shutter button down halfway, then press it down
fully.
The self-timer LED flashes and the image will be captured after the preset time
has elapsed.
The countdown is displayed on the LCD monitor.
To cancel the self-timer during operation, press the SET button.
The self-timer setting is automatically cancelled after an image is captured.
Use of the [
motion-blur that can result when the shutter button is pressed at long
exposure times. Use a tripod for best results.
].
button to select the desired flash
] and set the mode
button to select the setting.
10s] 10 sec.
[
10+2s ] 10+2 sec.
], [
], [Continuous], [AEB], [Burst],[Pre-Shot] and [Coupling Shot]
10s ] 10 sec.
[
2s] or [
2s ] 2 sec.
2s ] 2 sec.
10s] self-timer setting is effective in preventing
EN-19