Deploying Windows Essential Business Server 2008 On Proliant Servers; Pre-Installation Tasks - HP ML115 - ProLiant - G5 Integration Notes
Implementing microsoft windows essential business server 2008 on hp proliant servers
Hide thumbs
Also See for ML115 - ProLiant - G5:
- Quickspecs (28 pages) ,
- Integration notes (15 pages) ,
- Installation sheet (4 pages)
Table of Contents
Table 4. Supported ProLiant Gigabit Ethernet NICs available on PSP 8.11 and the Windows media
Gigabit NIC
Driver
NC371i
BXVBDA.SYS
NC373T/F/M/i
BXVBDA.SYS
NC374M
BXVBDA.SYS
NC380T
BXVBDA.SYS
NC6170
N1G5132E.SYS
NC7170
N1G5132E.SYS
NC7761
Q57AMD64.SYS
NC7771
Q57AMD64.SYS
NC7781
Q57AMD64.SYS
NC7782 PCI-X
Q57AMD64.SYS
Deploying Windows Essential Business Server 2008 on
ProLiant servers
Pre-installation tasks
To prepare for installation, ensure that the following conditions are met:
• The server selected for installation is listed in Table 1 as having the necessary support.
• Ensure the latest ROM is installed on the server.
• Any additional storage options added to the server are listed as supported ProLiant storage options.
• Any additional NICs added to the server are listed as supported ProLiant Gigabit Ethernet NICs.
• Go to the support and drivers page at
Windows Server 2008 installations for the server.
• Use the RBSU to set date/time and configure the boot controller order (if necessary).
• Use the Online RAID Configuration Utility (ORCA) to configure the RAID settings for the server.
www.hp.com/support
to obtain the supported ROM for
11
Table of Contents
