Catalyst 6506 Switch
Catalyst 6506 Switch
The Catalyst 6506 switch is a 6-slot horizontal chassis.
switch chassis.
the Catalyst 6506 switch.
Table 1-7
Catalyst 6506 Switch Features
Feature
Chassis
Supervisor Engines
Modules
Backplane Bandwidth
Catalyst 6500 Series Switches Installation Guide
1-18
Table 1-8
lists the specifications of the Catalyst 6506 switch chassis.
Descriptions
Six horizontal slots. Slots are numbered from 1 (top) to 6 (bottom).
•
Supports Supervisor Engine 1, Supervisor Engine 2, Supervisor
•
Engine 32, and Supervisor Engine 720.
Supervisor Engine 1 and Supervisor Engine 2 are installed in slot 1
–
or slot 2.
Supervisor Engine 32 and Supervisor Engine 720 are installed in
–
slot 5 or slot 6.
Supervisor Engine 32 and Supervisor Engine 720 require that you
–
install the high-speed fan tray. You must also install a 2500 W or
higher capacity power supply in the chassis to power the high-speed
fan tray.
The 2500 W power supply, when supporting the high-speed fan
Note
tray, can be powered from either 120 VAC or 220 VAC.
Supervisor Engine 720 has built-in switching fabric. Switch Fabric
–
Modules are not supported by Supervisor Engine 720 and cannot be
installed in the same chassis.
•
The uplink ports are fully functional on the redundant supervisor engine
in standby mode.
Redundant supervisor engines must be configured identically.
Note
Supports up to five Catalyst 6500 series modules.
•
WS-C6500-SFM and WS-X6500-SFM2 Switch Fabric Modules must be
•
installed in slot 5 or slot 6.
Some Catalyst 6500 series modules may:
•
Not be supported
–
Require that you install a Supervisor Engine 720
–
Have chassis slot restrictions
–
Require a specific software release level
–
Check your software release notes for specific information.
32 GBps shared bus.
•
256 GBps switch fabric.
•
720 GBps switch fabric.
•
Chapter 1
Table 1-7
lists the features of the Catalyst 6506
Product Overview
Figure 1-7
shows
OL-5781-04