HP NetStorage 6000 Release Note

The following late-breaking information supplements the HP SureStore NetStorage User's Guide and online

help. If information in the User's Guide conflicts with information presented here, the information in this file

should be considered correct.

OS Upgrade

OS Version: After upgrading from the original version of the OS (build 81) to version 3.3.x.x you cannot go

back to the original version without risking data corruption. If your file volumes are very large, the upgrade

process may take considerable time to complete. The progress of the upgrade can be seen on the HP

NetStorage 6000 LCD display located on the front panel of the unit.

Administrative Password Challenge for Internet Explorer 5.5: When upgrading from software build 81

to version 3.3.x.x, you may be challenged for an administrative password whether or not you set one

previously. In order to correct this problem, you need to:

Clear your local cache

·

Circumvent the web proxy cache

·

To clear your local cache and circumvent the web proxy cache:

1.

Open Internet Explorer.

2.

Select Tools > Internet Options.

3.

Under the General Tab, in the Temporary Internet Files section, click Delete Files.

4.

In the confirmation dialog box, click OK. You may optionally choose to delete your off-line content

stored locally at this time.

5.

Under the Content Tab, in the Certificates section, select Publishers.

6.

Select every occurrence of Hewlett-Packard or Hewlett-Packard Company, if any exist, and click

Remove.

7.

Click OK.

If you use a proxy server:

8.

Under the Connections Tab, select LAN Settings.

9.

In the Proxy Server section, check the box to Bypass proxy server for local addresses and click

OK.

10. Click OK again to close the Internet Options dialog box.

11. In order for you settings to take effect, you must shut down Internet Explorer and restart it.

Administrative Passwords: When upgrading from software build 81 to version 3.3.x.x, the administrative

password is lost. The administrator must input the password again after the upgrade.

Share Level Security Passwords: In software build 81, share level security passwords were not case-

sensitive. In software version 3.3.x.x, share level security passwords are case-sensitive. For example,

JaneD561 and janed561 would not be recognized as the same password.