Table of Contents
Manual Search
to select the Search option, and finally
Press
/
press
/
to start manual search. Upon finding a
program, the search will automatically stop, and the
program will be stored onto the current channel.
You may stop the search by pressing OK or MENU .
Fine Tune
Press
/
to select the Fine Tune option, and
then press
/
to start UP or DOWN fine tuning
until obtaining a relatively good picture effect. The
fine tuning function is for the purpose of improving
picture effect through fine tuning when that of a
certain program is not good enough. Normally, the
optimal picture effect can be obtained without fine
tuning when watching TV programs, and fine tuning
is to meet the need of adjusting a certain program.
Color system
Press
/
to select the Color Systems option,
and then press
to select correct color
/
system.
The TV is designed with three systems for your
choice,
i.e. Auto, PAL , SECAM and NTSC.
the system is set as Auto and it is not necessary to
make an adjustment. The system is normally set as
Auto during auto search.
Sound system
The TV is designed with four systems for your
choice, i.e. DK, M, BG and
necessary to adjust the system. The system is
normally set as DK during auto search.
Skip
When the skip is set ON, the channel will be
skipped when pressing CH
be selected by pressing 0-9 numerical keys.
If you want to recover the skipped channel
Generally,
I. Generally, it
is not
or CH
and only can
1. Use Direct-digit Choosing button to select the
number of the channel to be recovered.
2. Do the above steps again.
3. Press
to set Skip as Off.
/
Auto Tuning
Press MENU button and then use
select Channel menu.
Press
button to select Auto Tuning, then
/
press OK the menu opens.
Press
/
button to select Start, press OK button
to start to scan. Press MENU button to return to the
previous menu, press EXIT button to EXIT the menu
screen.
All channels now available will be automatically preset in
order .After the search has finished, the first program
number will display on the screen. This search
automatically adds only the active channels in your area
to the TV's memory.
It deletes any channels on which there is no broadcast or
a poor signal.
The channels found are automatically saved.
Exchange
Press MENU on the remote control unit or MENU on
the TV's front panel to display main menu, and then
press
/
to select Channel menu.
Press
to select the Prog. Exchange option,
/
and then press OK to enter its submenu.
Press
/
to select the To Channel option, and
LED -LCD television Owner's Manual
Specification and Format
/
button to
17
- Quick Links:
- Connection Option
- Specification
Hide quick links:
Table of Contents
