PCI retainer
For added protection, some cards have PCI retainers installed to prevent movement during shipping.
Removing the PCI retainer
1.
Disconnect power from the system
access panel
facing up.
2.
For both short and tall cards, press in on the sides (1) of the retainer, and rotate it (2) out of the
chassis.
Figure 5-20
Installing the PCI retainer
1.
Disconnect power from the system
access panel
facing up.
78
Chapter 5 Removal and replacement procedures
(Pre-disassembly procedures on page
(Access panel on page
Removing the short or tall card PCI retainer
(Pre-disassembly procedures on page
(Access panel on page
63). Place the workstation on its side with the system board
63). Place the workstation on its side with the system board
55), and remove the
55), and remove the
ENWW