Testing A Port; Online Tests For Ports - HP AK241A - StorageWorks 8Gb Simple SAN Connection Cli Manual
Fibre channel switch
Hide thumbs
Also See for AK241A - StorageWorks 8Gb Simple SAN Connection:
- Cli manual (270 pages) ,
- Cli manual (332 pages) ,
- Installation and reference manual (82 pages)
Table of Contents
Testing a port
You can test a port using the test port command using online or offline tests. The following sections
describe the test types, displaying test results, and cancelling a test:
• Online tests for
• Offline tests for
• Displaying port test
• Canceling a port
Online tests for ports
An online test is a non-disruptive test that exercises the port, transceiver, and device connections. The port
must be online and connected to a device. The following is an example of an online test:
8/20q FC Switch #> admin start
8/20q FC Switch (admin) #> test port 1 online
A list of attributes with formatting and current values will follow. Enter a new
value or simply press the ENTER key to accept the default value. If you wish to
terminate this process before reaching the end of the list press 'q' or 'Q' and
the ENTER key to do so.
LoopCount
FrameSize
DataPattern
StopOnError
LoopForever
Do you want to start the test? (y/n) [n] y
The test has been started.
A notification with the test result(s) will appear
on the screen when the test has completed.
8/20q FC Switch (admin) #>
Test for port 1 Passed.
ports, page 69
ports, page 70
results, page 70
test, page 70
(decimal value, 1-4294967295)
(decimal value, 40-2148)
(32-bit hex value or 'Default') [Default
(True / False)
(True / False)
[429496729]
[256
[True
[False
8/20q Fibre Channel Switch command line interface guide
]
]
]
]
69
Table of Contents
