Call Home Messages - HP AK241A - StorageWorks 8Gb Simple SAN Connection Cli Manual
Fibre channel switch
Hide thumbs
Also See for AK241A - StorageWorks 8Gb Simple SAN Connection:
- Cli manual (270 pages) ,
- Cli manual (332 pages) ,
- Installation and reference manual (82 pages)
Table of Contents
Call Home messages
The Call Home service generates e-mail messages for the specified event severity level and the following
switch actions:
•
Switch comes online
•
Switch goes offline
•
Reboot
•
Power up
•
Power down
•
SFP failure
NOTE:
For a power-down event, if the switch is forced to power down before the message is sent to the
SMTP server, no message will be transmitted.
When a qualifying switch action or event occurs, an e-mail message is created and placed in the Call
Home queue to be sent to the active SMTP server. You can monitor activity in the queue using the
callhome queue stats command. You can also clear the queue of e-mail messages using the
callhome queue clear command.
There are three e-mail message formats: full text, short text, and Tsc1. The full-text format contains the switch
and event information, plus the contact information from the Call Home profile and SNMP configurations.
The short-text and Tsc1 formats contain basic switch and event information; Tsc1 is formatted for automated
parsing.
The following is an example of a short-text e-mail:
From: [email protected] [mailto:[email protected]]
Sent: Wednesday, July 25, 2007 5:03 PM
Subject: [CallHome: Test] Alarm generated on Switch_8
SwitchName:
SwitchIP:
SwitchWWN:
Level:
Text:
ID:
Time:
110 Call Home configuration
Switch_8_83.215
10.20.30.40
10:00:00:c0:dd:0c:66:f2
Alarm
CALLHOME TEST PROFILE MESSAGE
8B00.0002
Wed Jul 25 17:02:40.343 CDT 2007
Table of Contents
