Managing Idle Session Timers - HP AK241A - StorageWorks 8Gb Simple SAN Connection Cli Manual
Fibre channel switch
Hide thumbs
Also See for AK241A - StorageWorks 8Gb Simple SAN Connection:
- Cli manual (270 pages) ,
- Cli manual (320 pages) ,
- Installation and reference manual (82 pages)
Table of Contents
Managing idle session timers
You can limit the duration of idle login sessions and idle Admin sessions (admin start command). You
can specify limits up to 1,440 minutes; specifying 0 means unlimited duration. Idle login sessions that
exceed the timeout limit are logged off (InactivityTimeout). An idle Admin session that exceeds the
timeout limit is ended, but the login session may be maintained (AdminTimeout). By default, no timeout
limit is enforced on idle login sessions; idle Admin sessions are ended after 30 minutes.
To display the idle login and Admin session configuration, enter the show setup system timers
command, as shown in the following example:
8/20q FC Switch #> show setup system timers
System Information
------------------
AdminTimeout
InactivityTimeout
To configure idle login and Admin session limits, enter the set setup system timers command as
shown in the following example:
8/20q FC Switch (admin) #> set setup system timers
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Current Values:
AdminTimeout
InactivityTimeout
New Value (press ENTER to accept current value, 'q' to quit):
AdminTimeout
InactivityTimeout
Do you want to save and activate this system setup? (y/n): [n]
60
Switch configuration
30
0
30
0
(dec value 0-1440 minutes, 0=never) :
(dec value 0-1440 minutes, 0=never) :
Table of Contents
