Defining Ip Addresses - D-Link DGS-3100-48 User Manual
Gigabit stackable managed switch
Hide thumbs
Also See for DGS-3100-48:
- User manual (295 pages) ,
- Installation manual (74 pages) ,
- Hardware installation manual (54 pages)
Table of Contents
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
Defining IP Addresses
The IP Address Page contains fields for assigning IP addresses. Packets are forwarded to the default IP when frames are
sent to a remote network via the Default Gateway. The configured IP address must belong to the same IP address subnet of
one of the IP interfaces. The Dynamic Host Configuration Protocol (DHCP) assigns dynamic IP addresses to devices on a
network. DHCP ensures that network devices can have a different IP address every time the device connects to the network.
1. Click Configuration > IP Address. The IP Address Page opens:
The IP Address Page contains the following fields:
Field
Static
DHCP
IP Address
Subnet Mask
Gateway
Management VLAN VID
2. Select the IP address type in either the Static or DHCP fields.
3. If Static is the defined IP address type, define the IP Address field.
4. Define the Subnet Mask, Gateway, and Management VLAN VID fields.
5. Click
19
Figure 0-3. IP Address Page
Description
When selected, the IP address is static and user-defined in the IP Address field. This is the
default value.
When selected, the IP address is retrieved from a DHCP server.
Defines the IP address. This field is active if the IP address is static.
Defines the address mask that manages sub-netting on the network. The default value is
255.0.0.0.
Defines the default gateway. The default gateway manages connections to other subnets
and other networks.
Defines the management VLAN's VID.
. The IP address information is defined, and the device is updated.
Hide quick links:
Table of Contents
