3.1 BEFORE STARTING
Read this section before you disassemble, assemble, or transport the printer.
Because the DFX-5000+ weighs 29.0 kg (63.8 lb) and is much larger and heavier than most
printers, you must be carefil when handling it. Whenever it needs to be moved, two or more
persons must carry it, supporting itfrom the botiom. Never lifi the printer by holding the front
cover, because it may come o#.
Before transporting the printer, remove the paper and ribbon cartridge. Then attach the following
packing materials, as shown in Figure 3-1:
Cl Carriage guide shaft support bar
c."'
,.
Rev. A
Figure 3-1. Attaching the Packing Materials
3-1