Table of Contents
6 It displays whether the PTZ controls are
active.
If you have set PTZ cameras for the DVR,
"PTZ" is displayed on the screen. Select a PTZ
camera channel and use the PTZ button for
camera control.
SPLIT-SCREEN
You can change the split mode by clicking each
number icon.
SINGLE MODE
QUAD MODE
Click
button.
•
The screen displays the selected camera
connected to the DVR in "SINGLE MODE".
Click
button.
•
The screen displays the selected camera
connected to the DVR in "QUAD MODE".
Click
button.
•
The screen displays the selected camera
connected to the DVR in "NINE MODE".
Click
button.
•
The screen displays the selected camera
connected to the DVR in "SIXTEEN MODE".
NINE MODE
SIXTEEN MODE
FULL SCREEN MODE
Click
button.
•
The screen displays the selected camera
connected to the DVR in "FULL SCREEN
MODE". To back to the previous mode, press
the ESC key.
CONNECTED DVR
This displays the IP address and the status of the
connecting DVR.
• Connection failure message
No Response : Appears when the DVR does
not respond.
Wrong ID : Appears when the input ID is
wrong.
Wrong Password : Appears when the input
password is wrong.
Wrong Port Number : Appears when the port
number is wrong.
Collision : Appears when Admin mode is
already in use or simultaneous access to the
same DVR from the PC.
User Full : Appears when the maximum
number of users is exceeded.
• The numbers of simultaneous connection are
3 which includes the users for SmartViewer.
Web Viewer _73
Hide quick links:
Table of Contents
