Table of Contents
installation
You should pay attention to the following before you use the product.
Do not use it outdoor.
Do not place water or liquid near the connection part or the product.
Do not impose excessive shock or force.
Do not pull out the power cord unreasonably.
Do not disassemble the product on your own.
Do not exceed the rated input or output voltage range.
Use the certified power cord only.
For the product with an input ground, use a power plug with a ground pin.
CHECKING INSTALLATION
ENVIRONMENT
Samsung Digital Video Recorder (hereinafter
referred to "DVR") is a high-tech security
equipment that contains a high-capacity HDD
and top-notch circuits. High temperature inside
or outside of the product may reduce the
product life, deteriorate performance (see the
graph below; it explains the correlation between
temperature and product life), and lead to a
malfunction.
Temperature
Unit: ºC
Figure 1
Figure 2
0_ installation
One Year: 24HR X 365 DAY =8,760 HR
Life (Unit: HOURS)
Please keep the following instructions for rack-
mounting the Samsung DVRs to proceed with
the installation.
1. The rack on which the DVR is mounted
should not be sealed off.
2. And it also can allow air circulation through
the vent.
3. As shown in the Figure 2, we recommend
you to heap the product with other DVRs or
use rack-mount devices at a certain space,
or install a vent system to accommodate
airflow.
4. For forming a natural convection, the air
intake hole should be positioned at the
bottom and the emission at the top.
5. We recommend you to install each of the air
intake and emission holes with fan motors for
sufficient airflow. (The air intake fan should
be equipped with a filter to prevent possible
inflow of dust and other impurities.
6. As shown in the Figure 1, the temperature
inside the rack and around the DVR should
maintain between 0°C ~ 40°C (32°F ~ 104°F).
HDD ADDITION
The user can add hard disks to this product.
(SHR-5162/5082: up to 2 hard disks,
SHR-5160/5080: up to 3 hard disks).
However, there are many factors that can cause
electric shock, accidents, and malfunctioning of
the device inside of the product.
When the user does not correctly install or
apply the proper settings, the device may not
recognize the hard disks or the device will not
properly run. Therefore, before adding any hard
disks, it is recommended that you consult the
specialist from the site where you purchased the
product.
Hide quick links:
Table of Contents
