Reset The Switch - Cisco PIX 520 - PIX Firewall 520 User Manual
User manual
Hide thumbs
Also See for PIX 520 - PIX Firewall 520:
- Installation manual (58 pages) ,
- User manual (24 pages) ,
- Online help manual (256 pages)
Table of Contents
Reset the Switch
Reset the Switch
Caution
Note
User Guide for the Catalyst Express 520 Switches
7-8
If you cannot solve a problem by reconfiguring a feature through the Cisco
Configuration Assistant, resetting the switch might solve the problem or help you
to eliminate probable causes. For example, if the problem exists after you reset
the switch to its default settings, it is unlikely that the switch is causing the
problem.
You can reset the switch only through the device manager. You cannot reset the
switch through the Cisco Configuration Assistant.
Resetting the switch deletes all customized switch settings, including the IP
address, and returns the switch to its factory default. The same software image is
retained. To manage the switch or to display the device manager, you need to
reconfigure the basic switch settings (as described in
Switch") and use the new IP address.
Resetting the switch interrupts connectivity of your devices to the network.
To reset the switch:
If you have access to the device manager, use the Restart / Reset window, and
•
click the Reset the Switch radio button.
This option resets the switch, deletes the current configuration settings,
returns to the factory default settings, and then restarts the switch.
If you do not have access to the device manager, follow the procedure in the
•
"Access Direct Managed Mode" section on page
Chapter 7
Troubleshooting the Switch
Chapter 2, "Setting Up the
7-6.
OL-12761-02
Hide quick links:
Table of Contents
